-
Content Count
695 -
Joined
-
Last visited
-
Days Won
13
Content Type
Profiles
Forums
Gallery
Everything posted by bigmax
-
After exhausting the suggestions and following e mailed instructions from Vinyl master without any success, I decided to go into the usb/ serial connection. As soon as I pulled the plastic end cap.........there it was. The ribbon cable was not connected. Reattached it and BACK IN BUSINESS!!!!! Thanks to all who offered suggestions. Still can't figure out how it came loose. Anyway, THANKS AGAIN.
-
suspect that darcshadow is right on connection wiring. Going to check into that in the morning. Thanks to ALL who replied
-
I did
-
Sorry , had to step away for a bit. I dug out a serial to USB adapter that I kept from my SC (old) model I used before getting the titan 2. Hooked it up (com port 3) Finally got the GREEN check showing connection however, when I click on cut, then click proceed with cutting.......nothing happens. Any suggestions at this point?Iuninstalled and re installed but as soon as I plug into the usb port I get the "device not recognized" Goin nuts!!!
-
Tried different USB cable, same message. "Device not recognized" Tried another usb port............same.
-
I went to US CUTTER support site but did not see the Titan 2 listed for driver download
-
Used SignBlazer for a long time then bought a Titan2 cutter with VM Cut. . After a while upgraded to PRO and have been very pleased. A lot of very useful features in VM. You can't go wrong.
-
Proof Versions -- now up to v.09 and still not approved!
bigmax replied to slice&dice's topic in Business Practices, Sales and Pricing, etc.
A little behind on this but I usually send a proof with 2-3 choices for the customer to select from. This has worked well for me and have very few to ask for more . Time is money and if they know there is a design charge (per hour) they seem to decide much quicker. Just my $.02. -
Really like the flag/guitar one
-
Sounds like excessive pressure. Even vehicle tires sitting on a solid surface will have a tendency to get "out of round". Just my $.02I would relieve the tension and then run it back and forth several times starting with minimum pressure and increase the pressure in small increments. This MAY round it back out.
-
Have a friend with a shop near me that has a Vinyl express Model PII-61 that will not power on. He said he has tried to get support from Sign Warehouse but no progress there. Anyone know the "original " maker. Is PANTHER a manufacturer or is that the model name. Probably the mother board, but need to know where to check for a replacement. ANY help is appreciated.
-
I sure hope that ALL our forum members are WELL and SAFE. As for me, I'm keeping to the Homefront and completely avoiding contact with anyone other than immediate family (wife and daughter)My brother lives in Madrid, Spain and it is really awful there according to our conversation yesterday. Hope everyone here makes it through this "life altering" situation. Truly, BEST WISHES and STAY SAFE!!!
-
Same here. Mostly dry buy clean most areas with denatured alcohol (most surfaces)
-
In need of rear and side view diagram of 2015 Dodge caravan. ANy help (where to find) would be deeply appreciated. Thanks in advance
-
Thanks for the info. Customer in a rush so I transferred a pic of the van, measured and scaled to window sizes. Worked out great. Thanks again
-
PLEASE>>>>>>anybody ??
-
Here's hoping that EVERYONE has a great but safe HAPPY NEW YEAR. Actual typo with NO alcohol involved!
-
Meeerrrrrrry Christmas to all o y'all !!!!
-
I have an SC no longer working. PM me and we'll work something out.
-
LMAO. Now , Now. Just think about all the mistakes, fussin', cussin' and frustration that you have prevented in those 20K posts. I for one deeply appreciate your posts.
-
Engstrom Graphics - Demolition Derby Signs
bigmax replied to Carrie Durham's topic in Show your work
Me too ! It's much more useful than " I think...…" -
Hello and welcome from North Florida.
-
good lookin stuff.