Instructions for setting up a LaserPoint cutter to enable contour cutting with FlexiStarter 8.6 or 10. (These instructions are written under the assumption that you have already set-up your LaserPoint in Flexi Production Manager and have it operating properly for regular vinyl cutting).
The first thing you need to do is create another setup in Production Manager as follows:
Open “Production Manager” – choose the “Setup” menu – choose “Add setup”. (The following screen will appear):
Click on the down arrow under “brand name” and choose “Creation-PCut”. DO NOT choose “US Cutter”.
Next, click on the down arrow under “model name” and choose “CT-630G”. Your “Add Setup” screen will now look like this:
Click “Next” and this screen will appear:
*1 – choose the same “COM port that is assigned to your LaserPoint” setup.
*2 – choose “None” for the Flow Control.
Click on the “Finish” button.
There you go, Your LaserPoint should be ready to do some contour cutting. Just choose the correct cutter in the “Cut Contour” window in FlexiStarter.
Good luck and again, Thank You Skeeter.