killerdecals

Thanks Speed I need to check that out

Actually I am connected serial port but I have tried usb and changing com's as well and same thing. I am almost starting to think it is a cutter issue because signblazer is so simple I can't imagine it being that. This summer it got damaged by lightening during a storm because it was plugged in so I had to replace the motherboard and I/O board in it. I don't see why that would matter either but I am out of ideas here lol. Anyone know of a good site to learn how to use flexistarter?

Zoomed in and it isn't trying to tile their is only 1 box.

here is my settings screen

I go to cut and settings and my cutting output size is 24"wide by 120" length so is the the setting you are referring to?

Nobody has any suggestions? Man this sucks lol

Sorry I have the US CUTTER REFINE MH 1351 and I am using signblazer right now. I have flexistarter 8.5 but I have yet to learn how to use it so I continue with signblazer until then. As for the file it doesn't matter what I use infact I can just make a rectangle and it will do the same thing. Thanks

I am trying to cut racing stripes for a customer which measure 20" wide by 72" long. Now when I go to cut this and the machine prefeeds it should move across the vinyl very slow compaired to the rollers because it is only supposed to move 20" but instead it moves just as fast as the rollers and will not stop moving across the vinyl infact if will move all the way across the machine until it hits the otherside of the machine if you let it. Now if I make the length 65" or shorter it is just fine and works great but any length over 65" it will do this crap. Why would my length be making my cutter do this when it's the width that the cutter is supposed to be measuring across? Any help would be great thanks

That would only matter for more then one copies correct? It's not even checked for one copy. Thanks

I have no weeding options checked

It's just a customers phone number so I am not going to put a customers phone number on here. I have my work area set to 24" tall by 96" long and the 11 digit number 1-715-625-4785and the number size is 12" high by 90" long. This should be an easy cut but for some reason it doesn't like the length. I tried it at 5" and no problems but longer it does not like. Just to make sure ...Is that a fictious # or the # you did not want to put on here ? I'll delete this post if it is the actual # . lol yes this is a made up number thanks

yes I make sure the Origin is set. Their is no kill switch on the other side so it will move all the way across until it hits the other side then starts making a horrific noise then starts coming back the other direction. Very weird why it does this. I don't understand why normal lengths are fine but does this with longer lengths. Thanks

I want to find out why this is doing this. It is only 12" high I shouldn't have to tile and piece it together it should be a pretty easy run for the machine.

I have them both at 15" by 120" With something this long and only a foot high the vinyl should be feeding much faster then the cutter head during the prefeed but the cutter head is moving almost just as fast so the cutter head is off the vinyl at about 40" of prefed vinyl. Is any of this making sense or am I being confusing? lol

I have them both at 15" by 120"