LOBO

simple enough.. thanks cohort. will do that

well,, i'm using corel X4 and when i export it always asks if i want to convert to curves.. so exported to curves to SB.. not all objects have a double image. Only some.. may just have to check all before cutting.. hmmm.. how can i check for multiple layers on SB? Besides selecting and moving one piece at a time.

how do i keep this from happening?.. it will be a pain in the Donkey... to have to go thru all work and check for multple images.

tquirts... you were right... but how does it come up with multiple layers. if its a single text layer when I export it to SB... Actually.. some of the letters had 3-4 layers on top of each other and others only 1.. WTF.. hmmm........

paco.. its signblazer its a circular pattern with letters all the way around.. the top half of the circle it cuts just fine but when its cutting the bottom half of the circle.. all letter it cuts 2-3 times each... ive tried with zero outline.. hairline.. still the same any ideas?

has anyone come across this problem before... the cutter is working fine.. but....... it's cutting some letters 2 to 3 times in the exact same place... example.. letter "O" will cut it once,, start over cut 2nd time.. start over,,, cut a third time.. ive switched fonts.. will also do it.. ok.. does not do it 100percent of the time.. but enough to say.. WTF!!!!..... any help is appreciated have LP24 toshiba tablet USB..Vista..

does anyone or can anyone give step by step instructions on setting up to cut directly from corel draw x4.... i've looked but cant find any.. I have OS Vista... LP24.. and Corel Draw X4... thanks for the help in advance.. ex.. how do i set up the cutter, corel... and do i set up the cutter as a printer.. saw that somewhere..

hey..... midwest.. have you looked into refillable carts??? I just ordered my epson 1400 for the wide format and making transfers.. its currently 179 on the epson site.. refurbished.. no new available right now.. i also ordered refillable carts.. from www.inksupply.com part number: ARC-1400-ec-set $32.95 it has an auto reset chip.. it comes empty so you can add your own favorite ink. they also sell the ink.. it is pigment ink.. from what ive read it is some of the best ink for heat transfer, wont clog the heads, wont change color with heat.. etc.. ink part number: HT6-4set $120.00 that includes all six colors for the 1400 in 4 oz bottles each.. i also got the empty syringe to tranfer the ink... and needles needed... MIS-syringe-6 six of them.. and mis-needle-10 10 needles.. i just ordered those yesturday... so will post something when i get a change to use it.. but i've been looking into it for a couple months now..and it looked like the best option. alot of people on another forum also have the same or similar setup and have nothing but good things to say about it.. i have not had any experience with the CIS system, but those who have wish they hadnt . and were glad to switch to the refill carts... hope this gives you anthother option and does not confuse you

just got some Easyweed and was wondering on what blade pressure to use. currently have 110 for regular vinyl.. suggestions for easyweed............. whats the better blade to use? thanks... what about for Oracle 651 Cal for wall graphix...??

Claw!! I've just been enlightened!!! I've seen it on videos.. but it did not mention wheather it needed tranfer tape or not.... thank you very much!!

Just ordered my first batch of Siser Easy Weed. So.. now i need to find out what the recommendations are for the transfer tape. Will any TT work with Siser to to transfer onto T's??? I have some already that i used for regular vinyl. But none especially for T's and Siser.. Suggestions..... experiences........ all appreciated. thanks Ps... will I or Wont I need the teflon sheet in addition to the tranfer tape to heat press???

ok.. i get how the .12 per square inch figures out.. but how did you come up with your estimate GUest???

exactly the one.. !!! thanks mike

I know ive seen one of the members made a price estimating excell template. where you plug in a few numbers and it gives you an estimate for almost any material.. size.. qty... etc.. etc... i downloaded it.. but now i cant find it.. does anyone know what i'm talking about?? if so.. can you link me to it.. its been a few weeks since i stumbled across it.. thanks...

Jay that solved the problem. i set the offset to .25 and it fixed those pies. that's why ur a Super Hero member .... u mention 12 is 1/2"?? what is the offset used for anyway? i really appreciate the help in solving the prob..