wickedstangs

Alright, I am up and running, pretty straight forward.. I hope. I left the machine on Condition No.1 and just adjusted the blade tip it seem to cut vinyl pretty good. I still have to figure out all the other conditions. I am using this with SignBlazer with the below settings. Here is my first cut.

What font is the small one?

Do you know what font is the urban is? I tried to use it and can't get it to come out good

What do you recommended for a flag football number font?

Thanks Mz SKEETER appreciate that...

Awesome thanks skaredrow...

How do you load your Media? I normally use a 15 in roll and use the alignment line on the left but, when I go and cut, the cut stop at the 2nd roller? How to manually set it? Thanks

how many colors do you do in HTV? can you post a sample? and congrats on the big order..

both are correct, I have open file in the free digitizing software but, upon further review, those free software's, that do auto digitizing are a joke. I can show some examples.. I would like to get into digitizing but, not sure which software are recommended.. I have found that some of the software are like 1000 dollars plus. I sent some file to a digitizing company and man they did an excellent job. When I opened in my free editor wow it was done so nicely.

Looking at ordering some shirts from Jiffy Shirt and wanted your recommendation on shirts? I have been looking at the Tagless from Fruit of the Loom (Fruit of the Loom Adult 6 oz. Lofteez HD T-Shirt) What do you all think or recommend getting? Thanks

Well Good News everyone I decided to cut out the Middle man.. (SANMAR) and contacted the companies direct and got me all setup now.. I did have to change my company name just to sound legit.. aka doing business as I have an account setup with Gildan/Hanes/Alstyle with no mininum orders and already ordered enough to get me started.. Hope this pans out again thanks everyone

Trying to do this to an images. Is this known has cartooning? Is there a software that can easily do this? and Can someone tell how its done... Thanks

ALSO, just for the record this is already 3+ weeks using a MAC and I hate this stupid thing...

Very cool, Sorry been away, decided to go to some adult classes on illustrator... Having a blast in this class... Here's a little learning how play with text and fon'ts..

I know how to bring it into Photoshop / Illustrator and remove the background how do I trace like the lights and stuff?

that is working but, I swear I tried that... Man thank you very much...

Even when I turn off the roller sensors still stops 10" If I don't put one of the rollers on the knurled is pop,s an error..

Thanks for giving me a hand.. This is driving me nuts.. Yes..

E05004 ERROR REALIGN PUSH ROLLERS

wow, i have tried everything.. It only cuts 10" width and the roll is a 15 inch roll

Alright the software I am using is signblazer.. It keeps stopping at the roller even with the media and push roller diabled.

I tried the book part already and that is why I was having trouble, I have try this dakotagrafx now... Thanks everyone fingers crossed..

All, I have tried everything how do you turn it off please show me step by step, I can't believe I can't get this....

2 pinch roller