bmc
Members-
Content Count
35 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by bmc
-
Aligning Vinyl Correctly - Need Tips
bmc replied to espy's topic in Copam Cutting Plotter Support Requests
I took 2 playing cards and put them against the left side and marked it with marker at the top alignment and bottom alignment ruler or just tape the cards to the machine put vinyl against cards put rollers down -
Work at home mom - new to the forum, needs advice for drifting?
bmc replied to bekbek324's topic in Introductions
thats a good cheaper cutter, ive used mine for 2 years, not a bit of trouble, i have the mh871 i have my pinch rollers to where the threads are flush with the top of the nut. on the vinyl tracking you have to play with it some, run the vinyl back and forth for the length of the cut your making and adjust as in the posts above .i also get the biggest plastic playing card i can find and put up against the extreme rh side of the cutter feed ,at the front of cutter ,and then another card at the rear of the cutter feed tape them down tight to the cutter ,leave the inside with no tape on it ,it will give you a nice sharp edge to put the vinyl up against and it will give you a 90 degree to the cutter blade , you do know how to set up the vinyl and run it back and forth dont you?turn on the cutter load the vinyl,roll off enough vinyl to do the job [mine really doesnt like to hit the roll it will throw the tracking off faster than anything punch the off line button then go to the up-down arrows and mash the frt arrow to run the vinyl out the frt.to watch for tracking straight ,adjust try again once you get it tracking straight, mash the left arrow to get the blade where you want it on the vinyl when you get everything right hit the origin button and your ready to cut ,or set the cutting pressure and the cutting speed the up-down arrows control the cutting speed the left-right arrow s control cutting pressure after you hit the origin button -
i use a nice plastic playing card on the front of the cutter, on the extreme rh side in frt of cutter, and also at the back of the cutter, tape the card stock down good ,it gives you a good straight 90 degree to the cutter, just run the vinyl up against it frt to back its in line.works for me
-
ive used 7.5 and 8.5 and the ruler is acurate in them ,if ive got to tweek it ill do it in the production manager before i cut
-
i really like my mh871,ive used it with no problems for 2 years and like it better than my roland pnc 950
-
Which is better gcc pro 24 or roland gx24??
bmc replied to lueman's topic in Roland Cutting Plotter Support Requests
i have an old 950 roland camm1 it came with flexi5.5 dos operating system this thing is older than air have sinceupgraded to flexi7.5and win.xp and this roland will still out cut anything else ive had .cant tear them up- 10 replies
-
- gcc pro 24 or roland gx24
- plotter
-
(and 1 more)
Tagged with:
-
MH871 is fantastic (first day opinion)
bmc replied to T3rry's topic in USCutter Equipment Feedback or Suggestions
hey ive had my mh871 for 2 years havent had a bit of trouble with it it will do every thing my roland 950 will do .good luck -
need a some basketball images. Not team logos
bmc replied to midwestgamecompany's topic in Graphic Requests
thanks, mike -
If you wonder why the Post Office is bleeding money
bmc replied to BannerJohn's topic in Off Topic Section
wait untill you see what the gov.can do for health care -
ive had great luck with the mh871,its never gave i bit of trouble in 3 years of cutting
-
stu thanks so much
-
there is a bunch here on graphic requests
-
this is great
-
welcome to the world of vinyl,this is the hardest and most fun thing ive done in a while, ive been doing this for 2 years now and im still not very good at it but i can do the basics and a little more, i sell mostly block letter signs ,yard signs etc.there is lots of sign making videos on you tube and here,most of the language is vinyl specific ,cutter ,plotter is the same thing,you will need a cut program to command the cutter[plotter],if you buy a us cutter it will come with a good cutter program,for free, you might need to look at the sign blazer forum here to get some basic knowladge before you start.you will need to start with some vinyl,an exacto knife to weed with,weeding means to take the vinyl you dont want off of the decal you cut ,you will need some tape to transfer the decal to what your going to put it on, there is vidios to show you how to do that here and on you tube, when you make up your mind on what cutter to buy be sure to get a stand with it its much better with a stand .you will need to get computer literate also, the design part is what kicks my butt most of the time if you get much beyond the block letter stage ,you will need some design experiance from somewhere ,im slowly figureing it out ,be sure when you take a job on you give your self plenty of time and not to complicated at the start ,there are lots of sights to down load cuttable pictures and graphics from one of the best free places is right here on graphics help there is like 83 pages of vectosr these great people have loaded here [just be sure to think them when you down load stuff],any way read read all the stuff you can here look at all the videos several times each and you will get the hang of it good luck and happy cutting
-
i have had great luck with my mh871 .i have an old roland and i like the mh better i hardly ever use the roland its an old 950
-
i started with a mh871from us cutter , sign blazer ,white ,black,yellow and blue vinyl,masking tape, a good light table[fish tank],a good from sign warehouse squeegy,a straight edge,a good razor knife and a good light over my table ,and reading all i could in here, saving all the great graphics here and playing a lot at night with the sign blazer program .i did up grade to flexi and i really like it there is plenty of info on e bay books and dvds on flexi good luck
-
How to deal with customers who only have .jpg images
bmc replied to ewen.jamie's topic in Business Practices, Sales and Pricing, etc.
there is great stuff on here on how to vectorize flexi pro is awsome for vectorizing ,if you get on ebay look for flexi tutorials mark rugen has all the flexi tutorials their pretty reasonable 100.00 for the book which is great ,the vidieos are great too i own all of them best money i ever spent -
Help!!! Everything moving backwards!
bmc replied to wiregems's topic in Creation PCUT Cutting Plotter Support Requests
try the roland driver pn1000 -
pcut 1200 and flexisign - cutting backwards
bmc replied to Lucasswift's topic in Creation PCUT Cutting Plotter Support Requests
when i loaded my flexi up to my mh871 i couldnt find the 871 in flexi so i put in something else and it cut backwards i looked in noobies post put the roland pn 1000 in and it took off and did great hope this helps there is a ton of cutters out there that use the roland format -
hey nidwaste great instructional i built one of these this weekend it works beautifully ive already done 18 8x24 signs on one change of app tape thanks loads im going to build the sides for 2 more
-
MH 871 good enough for small company wanting to do their own projects?
bmc replied to wayne1234's topic in USCutter Refine Cutting Plotter Discussion
i have the 871 with a stand its a great cutter ihave ran a small sign shop with it for a year i have an old roland 960 also and i like the 871 better some of the straight lines are a little wavy [you have to look close to see it]ive never had anyone say anything about it tho, so i think were to picky for our own good, i use flexi 8.5 pro with both machines i have sign blazer and its ok also, im just use to flexi ,i bought the training dvd for it ,scut vinyl for 3 years to get my roland to work o it was easier to figure out,read the post by ccr or paco about how to set up the cutter they are really tricky for a nubi,hell they are tricky to set up for anyone it took me 3 weeks with the help mof a friend that had a cutter for 3 yearsto get my roland to cut turns out i had to have a null cable ,the 9 pin conector worked great with my 871[it came with the machine as did sign blazer]have fun this is a great forum -
The 4th is coming! Lets get a patriotic clip art thread going!
bmc replied to bayshorecreations's topic in Graphic Requests
i stand in awe thanks so much