-
Content Count
1,195 -
Joined
-
Last visited
-
Days Won
11
Posts posted by Dr12volt1338
-
-
Yes thats what the box should say. I wasn't at a computer that I had SB on and I couldn't remember....Have you tried to restart your computer? If that doesn't do it I would say maybe try to reinstall SB... I had an issue a while back where I wasn't allowed to save files over a certain size and once I reinstalled it was fine again...
-
You can buy a 60" here and cut it.
That looks like the way to go it's for a Pcut so you know it will work and it's cheaper...... Good Find SKEETER!
-
http://www.cutterpros.com/Vinyl-Cutter-Plotter-Part-Creation-CRXXXX-Teflon-Cutting-Strip.htm
Found this on google... Maybe you can contact them and get a width on it to see if it will work..... How bad is yours can you take some sand paper to it?
-
There I go not reading things right again.
LMAO It's Friday you're not supposed to be reading or thinking this late in the day.... At least it's late here 4... It's probably only 1 or 2 there.....
-
Shirts & bags I suppose.
It looks like it has a felt pad on the bottom... I think that is more for lamination then doing transfer vinyl.. I'm not saying it won't work but if it where me I would go with the one for 149 from UScutter and get the teflon sheets with it... it's a swing arm so it will swing out of the way makes loading shirts and lining up prints on them much easier.... just my .02
-
What are you planning or pressing with it?
For about the same price you can get a swing arm press which I think would be better for doing shirts
-
They have the 24" ones I would call Customer Service and see what they suggest...... I would assume most any 48" strip would work....
-
http://www.brandsoft...allas%20cowboys
Thats actually a pretty simple image to recreate also but the star is there...
- 1
-
You can always open older versions of files with newer software. Why do you need it saved in a newer version?
It was created in a new version of Illustrator all he has is CS3.... CS3 wouldn't open it because it was created in 4 or newer
-
-
They offer a cheaper pay as you go service on their website... I think it was like $3.99 each time you used it... They also will give you 1 or 2 trial runs with the online version....
-
You can print on Aqueous vinyl with that... Mactac makes a very nice product.... There are methods of laminating that will help with outdoor durability but since it is not a solvent style ink it is better utilized for indoor use only.... Looks like it will print some very high quality photos I would definitely look into custom style prints like that...... There are a lot of products out there.. I have even seen photo paper with an adhesive back you could do a lot with that..
-
That was one click in Vector magic. Took about 45 seconds to do it.... I could probably clean it up and have all the colors even in less then 10 minutes..... I have run images through that were higher res. and had a perfect vector in a matter of a minute or 2.... I had an company come to me a while ago with a very intricate custom logo they wanted me to redo and put on a few trailers and a couple trucks they also wanted 150 shirts and 50 hats done so that job alone paid for the program and saved me a weekend of vectorizing in Inkscape.... In my case it was WELL worth it....
- 1
-
thats perfect, i appreciate it so much. the team is going to love it.
It needs some cleaning if you look close there are some jagged edges that will need some minor attention.....
-
Good work 12volt. Did you trace that in inkscape?
No I use Vector Magic Best $300 I ever spent
-
In the Open screen is the "Preview" box checked?
- 1
-
**butting in** How well do printed decals hold up in weather? Just curious, as I get requests for complicated designs and it would be handy to hire out that kind of work (if it is affordable for me).
If it is a solvent printer they hold up very very well....
-
I agree you need to add something to the sides the help lead to the thought of a wrestling belt... Just looking at it I wouldn't have a clue what its supposed to be.
-
It gives you a warning if nothing is selected.
Mine used to but since I upgraded to the All Cutter version it doesn't anymore.....
-
They are the same method my way just eliminates the risk of not unchecking the "Selected" box in the export screen for SB
-
These are what I use I have the Blue Max also but the oranges are nicer... make sure you order a handle also... I use one like the 1058 but I don't see the ones I have listed there anywhere.
-
-
I can't wait to do my sons room. Wife is all excited now that she knows we can do this.
regular vinyl is used right?
Oracal makes a vinyl made for wall art. It comes off easier when its time to remove it... It's their 631 series.... I use Greenstar myself doesn't come off to bad with a little heat...
-
When you say it is a brown glaze around them what do you mean? Do you have a name or link for the actual product?
Lost File Previews in SB
in SignBlazer
Posted
You always have to ask the obvious you'd be amazed at how many people will fight an issue for days and days without trying a restart.... I have heard they are working on an updated version of signblazer...... It has been a rumor for a while now.. It's just like any Windows system there are going to be glitches... You could have installed an update for Windows that corrupted a file in the SB somewhere who knows.... I hope it works for you.... If it doesn't then we know it is something within Windows if it showed all the previews before..