• Content Count

  • Joined

  • Last visited

  • Days Won


Everything posted by Dr12volt1338

  1. Dr12volt1338


    From the album: 2011

  2. Dr12volt1338

    Cuttable Horse Head

    I have a few on file but none of them are cuttable. My Mother In Law just had to bury her horse a few weeks ago and would like an in memory type thing. I created this for her and she really liked it but the horse head just isn't cooperated. I think it is too "detailed" and doesn't want to weed. Maybe if someone has something similar to this or can tell me how to make the horse head cut right I would be greatly appreciative. She really emphasizes on having a cowgirl figure as I have some nice cowboys kneeling at a cross with the horse(that I found here THANK YOU AGAIN) I will even take some insight on how to create what I want on my own as I am still learning how to create graphics from nothing. I thank you in advance for any help!! EDIT: File removed due to possible copyright violation. Jaybird
  3. Dr12volt1338

    Signblazer font names

    Is there a way to get the actual names of Signblazer fonts to show up in Flexi? As opposed to them being listed at SBF_****? I have to always go in to Signblazer and look at the font and them see the corresponding number in Flexi.
  4. Any thoughts on what the base is for this?
  5. Dr12volt1338

    searched 25 pages at dafont and all of mine - find nothing

    C.A.C Champagne.
  6. Dr12volt1338

    searched 25 pages at dafont and all of mine - find nothing

    Arizonia is one I used in the past also.....
  7. Dr12volt1338

    searched 25 pages at dafont and all of mine - find nothing

    What about tweaking like Chopin Script a little?
  8. Dr12volt1338

    Need new cutter

    Well I am back once again... Been gone for a while but I need to upgrade my machine.. LONG story short I worked with a Graphtec and realized just how bad my machine is... I can't afford a Graphtec but need to ditch my R31... Looking at doing this this weekend as I have a few runs of vinyl and 100 shirts to do this week.... Looking at the GCC Expert 24 but am open to other suggestions... Maybe the TC series... Looking at around the $600 range for a machine that will cut 23"-24"
  9. Dr12volt1338

    Potential Scam???

    I will start with how this all started last night...... I received a text on my phone about 9PM from a very odd number so I opened it... It was some kind of pre announcement from Yahoo saying I had received a new IM.... Now I haven't used Yahoo in at least 4 years for ANYTHING except when I sign up for something where I don't want to receive any mail from them... So just for kicks I downloaded Yahoo messenger on my phone and logged in.. I got a message from someone by the name of Tracy Jack wanting to know what kind of vinyl work I did and if I accepted credit card... Now right away this flagged for me because I have NEVER associated my business with my Yahoo account... I asked her where she had heard of me and she said she found me on Facebook... Again very odd since I don't use my Yahoo address on my facebook...... So wanted to send me an email of what she wanted to have done on her car I accepted but after an hour she couldn't get the email to go through... I was thinking it was a scam so I just gave her the Yahoo address and went to bed..... I get up this morning and there is an email in my business account from her... 2 of them actually... Again my business name and account is in no way linked to my Yahoo stuff.....So I got a little excited thinking that maybe this was a real job UNTIL I read the email... Now it says shaky all over it again.... She emailed it from one of her accounts to another one of her accounts but "bcc'd" me into it... And this is the email she sent me..... I am located in Michigan..... Hello This is Tracy Jack, and do you do work on vehicle wraps or custom vinyl graphic on car and can and also do you accept credit card,i`ll be needing your help my I just bought 2006 Toyota Camry in Colorado state though i live here in the states,am presently in the hospital cause i had accident last week and i want signage down on car thats is why i want the car delivered down to your shop so you can handle the auto signage and can u do that for me i will like to tell you that The car are with the shipper in Colorado State but i live here in state so that is why i want my car towed back home for the signage in good time so can i have your shop address so that i can forward that to the shipper so they will have the car delivered to the front of your shop for the job and that is type of design i want on the the Camry so i will like to know the type of credit card you accept as well so i will like you to get me proper estimate quote so will can process that out and also let me know the one you can use for me among the two design i attach to you so you can get me the proper price for it thanks Best Regard
  10. I have found a few on here but need to some new ones I have a customer who likes to change her butterfly on her back window every few months Thanks guys!!
  11. Dr12volt1338

    Help with Flexi

    If you haven't resolved this they files would need to be put into a .zip folder in order to be posted.
  12. Dr12volt1338

    Need Logo Vectorized

    Thanks for the share! Someone sent me that a LONG time ago and I thought it would be a great sticker then forgot about it Thanks again!!
  13. Dr12volt1338

    Sign Cut Pro Issues

    Couldn't have said it better Skeeter!
  14. Dr12volt1338

    Trouble importing a DXF file

    Did you try to import instead of open?
  15. Dr12volt1338

    Can anyone get Inkscape to open this .eps file

    It was not a valid .eps file but here is the JPEG and an actual .eps... The .eps will need a little cleaning to cut though.... Untitled.eps
  16. Dr12volt1338

    SureCutsAlot Pro

    There are free trial versions available floating around... Whether or not they have the same exact features I can't say but it may give you a better idea on the layout and UI of the program.... I would post links but all of them appear to also be selling the software...
  17. Dr12volt1338

    Decal not sticking to paint! Help

    All the wall art I do if there is ANY texture to the wall at all it just takes patience.... Wrap your hard card with paper towel and keep pressing and pressing and pressing some more... Then slowly peel away your transfer pressing the actual vinyl when needed..... Also make sure the wall is very very clean watch what you clean the wall with as most all cleaners seem to be extra bad with leaving residue on painted walls....
  18. Dr12volt1338

    font id please

    The small print under com looks like Benton Sans.... probably bold.... Take a peak at Eurostile heavy italic on the other.... its real close I think
  19. Dr12volt1338


    That link is verified NAG free on Windows 7 Home Premium
  20. Dr12volt1338

    Please keep shopping carts...

    If I recall there is an option to save for later..... That is for this exact situation if you are going to browse throughout the day and not place an immediate order... I always wait until the end of the day to place my orders so I don't have to keep calling Customer Service and adding to the order.....
  21. Dr12volt1338

    Lime Green Transfer

    Anyone have a source for Lime Green heat transfer vinyl.. I know I have seen it just none of my suppliers offer it.
  22. Dr12volt1338

    Two Color Wrap - Application Ideas?

    Very nice!!!! They look great!
  23. I would assume the "Show me" feature should work just fine... I have an entry level chinese cutter on a serial connection and I use that feature all the time.... I have never used a Graphtec but I see no reason why it wouldn't cut reflective material.....
  24. Dr12volt1338

    Best Software for Graphtec CE500-60

    +1 I have used Corel and Flexi (LXi) and I just think the whole user interface with LXi is easier... plus it has all the cutter drivers built into it allows a lot of cutter control through the production manager.