Dr12volt1338

You can layer heat press vinyl to get multiple colors....(Most of them some say do not layer.) You just have to figure out at what point is it not worth it to press them and print instead.... You can look into a Sublimation setup with printable transfers also......

Is it anytime the rollers reverse? Or do you have it set to go back to the beginning after a cut?

Sounds like an advance before plot issue maybe... Or maybe an orientation issue... Took me a while to figure out orientation when printing... just a guess.... SKEETER has probably the best advice..... Go with Signblazer you can download it from this forum for free and it will do most anything you want to do...

I agree best way for us to give the best guidance is for someone to see what we are working with......

Just as anything else you need to figure in your overhead and how much you feel you need to make per unit to cover that... Noone here can tell you what to charge as that varies from region to region... What I am able to charge here someone 40 miles away can get much more for....

Sorry I went through all my curly style fonts and nothing.... May be somewhat of a custom design where someone added curls to a different font...... There are 1 or 2 on dafont.com in the curly section you may be able to make work BUT there is a noticeable difference....

I use it on short term signs also and works very well for race cars since I can sell it so cheap they don't have an issue coming back every few weeks and having me re do them as opposed to putting Oracal or something on there where the price is border line and they only want to do it once maybe 2 times a year.... I have a couple cars I help sponsor and do the vinyl at cost I re do both of those almost every other week.....

I think you mis understood what I was saying.. I wasn't saying it was good he was posting the GM stuff I was trying to state if I was in VIP situation I would be ok with another graphics shop sending potential business to my site as "Ill guided" as it is.... Obviously people looking at the link are there buying decals if I was a consumer and clicked on the link I would see what a great job he did and how much pride he took in making the VIP directions that I would MOST certainly check out what else he had to offer... If he took that kind of time and effort into doing something just solely to help his customers then that seems like the kind of place I would want to buy from..... I was in no way saying Stickeezy was in the right for posting the link I was just trying to state my opinion that it is only going to bring more attention the a better outfit being VIP..... And no I have no affiliation with them I was just impressed by the direction link it looked very professional....

It's a link to a public instruction set... He's not claiming rights to it or claiming to be the owner of it..... If I was VIP I would be fine with it it's a competitor sending obvious decal buyers to a link with my name on it.... NOT real bright to send your clients to a competitors website for instructions but not the worst thing someone can do......

Thanks Appreciate it!

Cool beans

Take this for a spin..... AVlogolarge(1).eps

Hello and Welcome from MI!!!

Thats to much blade sticking out..... It should be just the absolute tip sticking out....

Alright I guess I will jump on the band wagon here....... http://www.facebook.com/GreatLakesGraphics

I've never had a problem with using coroplast and we also get some pretty wicked wind, mine always came out of the ground long before anything else...Where are you getting your blanks from? Are they real cheap and flimsy feeling.. They make a product just like coroplast but it's aluminum, probably won't be real cost effective in what you are looking to do....

I'm pretty sure I ordered black ones from Fellers...

Mark is a human font Library! Look through the font section further you will see he has a ton of answered fonts and he knows them just from looking at them..... I just did a job for a local car here he number was also 87 his was very very very similar I searched high and low. I finally got ahold of the guy who did the originally and it was a font he did some node editing on it. Of course he wouldn't tell me which one but he did tell me it is a very very common font to start with for race cars and tweak it..... What that is I have yet to find.

$30 and I can have it ready to cut

Rockwell Bold is pretty close..... Use the outline and shadow features in your design program then punch it through unless it is supposed to be white with a red background.... The "S" are a little off but unless you have them side by side it's pretty tough to tell.....

Sounds more like you want Sub printed transfers not screen transfers so you can transfer them yourself?

What program are you trying to import into?

No Image

I had an issue a few months back that was similar I had to uninstall Inkscape and reinstall the newer version and I haven't had an issue since..

This is one I have... I took just the Semper Fi part as the rest isn't real crisp.... semperfi.eps