Dr12volt1338

Members
  • Content Count

    1,195
  • Joined

  • Last visited

  • Days Won

    11

Everything posted by Dr12volt1338

  1. Dr12volt1338

    Neverending stream of small requests

    @Slice... I don't know how long you let that vinyl lay flat on the table in the background but after time it will develop flat spots. I know not over night but after a few weeks you will notice it... Just a heads up... Also what are those blue mounts you are using for your app tape holder?? I like the looks of that set up.
  2. Dr12volt1338

    Nice Sign We did

    Super Sharp!!
  3. Dr12volt1338

    can someone do this for me

    LOL just stuck another post it note to my screen to remember to use that instead of typing so much.
  4. Dr12volt1338

    can someone do this for me

    You know I downloaded JING like 8 months ago and have only used it once... I keep forgetting I have it!!!
  5. Dr12volt1338

    can someone do this for me

    If you designed it in AI then you can click save as and save it as an older version go back to like AI 7 or so that usually works fine.
  6. Dr12volt1338

    can someone do this for me

    Save them as an older version of an AI file and they should import ok into signblazer.
  7. Dr12volt1338

    Help With checkered Roof

    Its a really nice feature...... and you can set the spacing between each square has A LOT of options.
  8. Dr12volt1338

    Newbie here to Cutting

    Welcome From MI!!!! Youtube is where I get a lot of my help from. There are many many good videos on most any feature you could want to use.
  9. Dr12volt1338

    Help With checkered Roof

    created a square 50mm by 50mm arrange> step and repeat, select the height by width # of squares. I just did 4x4. Hold shift select the ones I want white, select all, save as a pattern. Now I have a checkered pattern I can create any shape and fill it with that pattern. Have to export it as a .eps to get it to cut for some reason, I'm looking into that now.
  10. Dr12volt1338

    Help With checkered Roof

    Good job Jay!!!! I had no idea how to do it in SB so I made this real quick in Flexi.... Much fewer steps LOL Checkered.eps
  11. Dr12volt1338

    Cute Window Sticker

    That will be great for Halloween THANKS!!
  12. Dr12volt1338

    Easy weed nightmare

    I had a roll of white do that to me I fired up my press and ran the vinyl in between the plates and lightly pulled and stretched it got it smooth enough to cut.... I would at least call and let them know what happened snap a few pics so you have it on record.....
  13. Dr12volt1338

    Cutting a roll in half

    Possible..... I tried a rip blade and a high tooth count for trim and both made a bigger mess then I wanted... I'm not saying it won't work I just didn't have a good experience my first time..
  14. Dr12volt1338

    Cutting a roll in half

    I cut mine with a saw like the one above and made a HUGE mess... it got way to hot cutting and melted the ends together.... I have a local shop cut mine down for me now after I just pin stripped a boat... They are very good and will usually cut it while I wait... They have what looks like a large pipe cutter they use... Wish I could find one.
  15. Dr12volt1338

    Font similar to this...

    At dafont look in the Calligraphy fonts..... I just did a quick scan and found a few that would fit your theme very well.
  16. Dr12volt1338

    Flexi 10 Pro with MH-721 - second "send" goes etch-a-sketch

    I am not sure but I think I have read that with that machine you have to reset or bring the head back to home before every cut....
  17. Dr12volt1338

    help with this font

    Performance looks like serpentine bold to me.
  18. Dr12volt1338

    SC 631 Cuuter -- which driver do i use

    3rd post down from user cut me....... The crack took me a few times to get the correct file located but it does work once you do..... http://forum.uscutter.com/index.php?/topic/20104-full-version-signblazer-download-all-cutters/
  19. Dr12volt1338

    Flexi Bitmap problem

    SA you got me thinking and that is how the problem can be solved..... OP in your import menu uncheck the tick that says link on the right..... Now it will import as a file and not a link to the original document...
  20. Dr12volt1338

    Flexi Bitmap problem

    No need for the attitude...... I have emailed them at all kinds of odd hours and was amazed at how fast I received a response... You're kind of new here and after time will learn Skeeter is probably some of the best help you can find when it comes to Flexi so if she doesn't know or is resorting to SAi then that is probably the route you will need to take.....
  21. Dr12volt1338

    magazine???

    I used to get some tint magazines that covered a lot of vinyl cutting stuff on the small business end.. I will have to dig through my files and see if I can locate them... I forgot all about them until I saw the pic of Gable and it reminded me of the old solar tech days for some reason.
  22. Dr12volt1338

    Flexi Bitmap problem

    I have a laptop and my cutting machine and both have an external hard drive plugged in and back up every Tuesday and Friday........ Plus any other time I get an urge to back them up..... I also back most all of my commonly used stuff on DVD...... I lost all my files a few years back and was devastated, I still haven't been able to relocate some of the great files I had. But back to the issue... There aren't that many settings in Flexi to adjust so I would get ahold SAi support and see if they can help......
  23. Dr12volt1338

    Flexi Bitmap problem

    LOL... I have 8.6 PRO and as far as I know everything is set to default settings and it works fine.....
  24. Dr12volt1338

    Race Car Numbers...in Flexi Starter...

    Select your text.... go to effects at the top and see if outline is available... I can't remember if Starter offers that or not.... once you outline it you have to click on the green check in the outline box to apply it. Also make sure if you want a backing on it you have that option selected..
  25. Dr12volt1338

    magazine???

    Good find Slice!! I just sent a request for an issue to check it out.