Yones12

How do you change it in the cutter? you can read your user manual, if you don't have one, you can download it from the support link at the top of the main forum. http://support.uscutter.com/ I looked in my manual, and their is nothing about changing offset on the cutter, only in flexi

How do you change it in the cutter?

How do you read this?

Sounds like you were very busy, To bad i was golfing on this beautiful monday here in michigan. Great Work

Okay thanks so much, I will let you know

This guy sent me an email and he wanted this logo. I've tried cleaning it up in flexi, and a little bit in inkscape, Can anyone draw this and send it to me in an eps, Thanks so much

Thank you so much! At least this gives a good start. Thanks again

Sorry, Its attached now

This guy sent me an email and he wanted this logo. I've tried cleaning it up in flexi, and a little bit in inkscape, Can anyone draw this and send it to me in an eps, Thanks so much

I've been selling decals on ebay and i wanted to know which decals do you think would sell the most? Thanks

Okay my pinch rollers are marring up my vinyl, and making the imprints of the grit roller on my vinyl. I heard that once you apply the vinyl it wont show up. but i sell them locally and i dont want a buyer to see that on their. I tried loosing the pinch rollers all the way and you can still see the imprint. If i loosen it anymore the nut will come off the tension-er. Any help please

This is my workspace. Let me know what you think and post yours too

Haha, Dont we all

Lets hope not

Thank you i will do that

Okay so i need to re-order some more business cards. My dad owns a party shop and i had put that address on their so it looked more professional, but i do all my work out of my home. Anyway i was thinking on my new cards i should put my home address. What do you guys think? Let me know, Thanks

I had the same problem the first week i had my mh-871, My uncle who has been doing this for 35 years + . looked at my vinyl when it was in the machine and laughed. You have to look real close and make sure the vinyl is straight. Keep adjusting until your tracking in perfect.

Okay, Thanks. I'm in Michigan so ill have to check out the laws

Just received my 60 degree blades today and decided to cut something very small.... it was 1" long by 0.183 wide. Cuts a hell of alot better then the 45 degree blades.

Can you use an regular iron to apply iron on vinyl to a t-shirt?

Thanks everyone, i tried getting the picture bigger but it wont let me.

Um, Im not sure, i just went to the uscutter's store on ebay and bid on the 60 degree blades

What is the difference between 45 degree blades and 60 degree blade?

First off. I plan on cutting some t-shirt vinyl on my refine. What do you recommend i use for a blade 60 or 45 degree? Also can the refine cutters, cut window tint?

Thanks, And if i misunderstood. you said you use 60 degree for everything you cut?