DeonCarpenter

Members
  • Content Count

    46
  • Joined

  • Last visited

Everything posted by DeonCarpenter

  1. I decided to buy a GraphTec ce6000-40. The ce6000 cuts great but it won't cut chrome even with a new blade on its highest setting and the blade extended. I have used a Copam 2500 for years and it cuts chrome like it was butter. Any advice on cutting chrome with the ce6000 would be appreciated. I am using SignBlazer 6.0 software.
  2. I picked up a slightly used FC3100-60 this weekend for $300. The owner claimed it had been in storage for 10+ years after he replaced it with a larger cutter. It test cuts perfect but I cannot get it to communicate with my computer. I have tried HP-GL and GP-GL settings. I am using the parallel interface on LPT1. The interface setting is at RS-1 (9600 8bit N H)I also tried (9600 8bit E H). I checked that the COMM settings match. I can switch the cable over to my Copam and change the settings in SB and the Copam works great. SB has a setting for the FC3100-60 and from the literature I found from GraphTec it does not need a special driver and it should work with generic HP drivers. Any help would be greatly appreciated.
  3. DeonCarpenter

    I Need Stick People

    I need some stick people. I bought the Stick em Up collection, http://www.clipartan...le_Clipart.html and downloaded some free ones http://downport.blogspot.com/2008/03/stick-people-phapes.html, but I need more. I am willing to trade 2-1 for some good stick people.
  4. It works! I stopped by a computer repair store and picked up a cable. It has a DB25 connecter on the computer side and a CN36 on the cutter side. It is a Belkin F2A036-06 Bi-Directional Printer Cable (6ft), $3. I plugged it in and the cutter started cutting, I guess it has stuff in there waiting to go. When I say it works I mean it works, it puts my Copam to shame, and I really like my Copam. That is from a 20+/- year old cutter. Here are the things I did but I don't think they did anything I am almost sure it was the cable. The settings on the cutter RS-232C Cond No. 3, Command HPGL, running on LPT1 I also installed a Roland GSX-4000, Graphtec FS3100-60, but I don't think it is using a driver.
  5. DeonCarpenter

    I Need Stick People

    Their is no Vinyldesigner.com but myvinyldesigner.com/ looks like a great collection, thanks. I assume that is the one you were talking about.
  6. DeonCarpenter

    I Need Stick People

    Not trying to be disrespectful but I just scanned threw my Clipartandfonts.com collection an in just one section I see over 100 copy written logos that I know they do not have license to. I was selling some Honda decals on eBay that I got from their cd and I was shut down for copyright violations. Clipartandfonts.com sold me illegal stuff. Sounds like a counter suit if you ask me. Those without sin should cast the first stone.
  7. DeonCarpenter

    I Need Stick People

    I was not trading those.
  8. I changed the setting to HP-GL but still no luck. I have looked for a driver but I cannot find one for this model but I have found them for every other model of Graphtec. I have tried drivers for some models that are close but it did not work. I also tried some HP drivers but my computer did not recognize them. I installed the HPGL/2 driver but that didn't work either. I found a 64 bit driver but only my laptop is 64 bit and it is USB only so I ordered a usb to parallel adapter. I hope that works.
  9. OK I am wrong again. I am using the RS-232C Serial connection. I am using a 25 pin Male to Male cable. When I use it on the Copam I use the LPT1 setting in Sign Blazer. I assumed I would use the same setting with the Graphtec since it uses the same cable.
  10. I am using Windows XP 32 bit. You are right the RS-1 is for Serial, thanks. I am using the Parallel cable, the same one I use for the copam. I guess I need to figure out how to tell the cutter that I am using the Parallel cable. http://www.graphtecamerica.com/users_manuals/CutPlot_UM/legacy/FC3100-100-120.pdf I am looking at Chapter 7 - PDF page 90
  11. DeonCarpenter

    Resale of Graphics Collection

    Thank you for your help.
  12. DeonCarpenter

    Resale of Graphics Collection

    I purchased a graphics collection and it was not want I really wanted. I wanted to know if I could resale it. I have not used the graphics so would the EULA apply? Also a copy of the EULA was not available before the purchase so they could put anything in there. I requested to return and get a refund but they said no. In the EULA it had the statement "images are proprietary and copyrighted by #########" But there are images that I know are other companies copy-written material and not theirs, for example the Monster Energy Drink logo.
  13. DeonCarpenter

    Copam question

    If you are using USB try slowing down your Copam to 30 or 20 cm/s. Once it is finished "sending" you can pause and speed it up to 60 cm/s. Your cutter is out running your USB.
  14. DeonCarpenter

    HP Designjet

    I have an HP Designjet 5000ps with pigment UV inks. It prints great don't hesitate because of the colors. They real downfall for me is the time it takes to get the first print off the printer, sometimes an hour. If you are printing a lot, like 500 movie posters at a time, go for it. If you are just printing one or two things per day stay away from this printer.
  15. DeonCarpenter

    How do you make photo license plates.

    Thank you!
  16. I want to make photo license plates but I don't know how. I figure you just print and then press but not sure what materials to use. I have had limited luck using t-shirt heat transfer materials on aluminum tags. Any help would be appreciated.
  17. I ordered from US cutter and FedEx left the packages outside, when I was not here to receive them, and it rained on them. I contacted US Cutter and this is what they said: Live Support: Unfortunately there is not much we can do, if you wanted the package to be left in a certain location that needed to be determined prior to shipment Deon Carpenter: You don't leave packages in a place they can be rained on. Live Support: well sir, we are US Cutter, we are not FedEx, once the package has been shipped, we have done our part Deon Carpenter: That is very rude Live Support: I am sorry this is not the response you are looking for, but once the products have shipped, they are out of our hands Live Support: have you contacted FedEx? Live Support: the next step would be to contact FedEx and file a claim with them Deon Carpenter: Yes, FedEx said contact the shipper. Live Support: the responsibility is on FedEx, they left the product in the rain, not us, we had no control over this situation whatsoever
  18. I have had my Copam 2500 for about a year now. After a short learning curve I was able to get very detailed cuts with my Copam. Now many of the cuts are not lining up, leaving tiny gaps about the size of a hair usually on the outer radius of the cut; always where the start and finish of the cut come together. When weeding this pulls up the vinyl that should stay on small cuts. I originally set the offset on the Copam to 0.25mm, and 0 in the software, but over the past year I have had to reduce it. I am now cutting at 0.15mm. Any different settings and it is worse. I am using US Cutter
  19. I am trying to convert a graphic into 3 shades of green, one of black, and smooth out the edges. I just can't get this thing to work for me. Any help would be greatly appreciated. I have PhotoShop, AI, Flexi, and SBE.
  20. DeonCarpenter

    Need help with converting a graphic.

    I will try again.
  21. Mike, How did you know? We are practically neighbors.
  22. Save a blank Sign Blazer file to your desktop. Rename that file to SignBlazer and delete the factory desktop shortcut. When you open the file you will avoid that annoying failed update. SB will be up and running in less than five seconds. If you don't know how to save to your desktop simply save the file in the C:SBD files and then drag it to your desktop. (Substitute your drive letter for the "C" if needed.)
  23. DeonCarpenter

    My first Break-Away Banner

    My first Break Away Banner 6'x12' The other banner is a 3'x6'
  24. Mine did the same thing and what I did was take a block of wood, about 2"x4"x6", and placed it on the white cutting strip and hit is with a hammer, a lot. I eventually got it evened out. I don not think it was the cutting strip, I think it is the alignment of the top of the machine to the bottom. There is no adjustment there so you have to do what you have to do to get it to work.
  25. DeonCarpenter

    Copam questions

    Take that USB cable and throw it as far as you can! The Copam is not true USB. SignBlazer is the best program I have used for the Copam. I have Flexi 8.1 and SignBlazer and I prefer SignBlazer.