Rip_frannie

Who creates Dirt bike graphics ? Id like to see photos and also some info. What machine your using, are you freehand tracing the plastics then scanning or do you have a pre loaded software for each bike.

Whats up everyone. I just finished a big project up i was working on for myself. It was a photo of my 3 dogs. 2 have passed away since i started but the project turned out very well. But isnt done yet. I took a 4 foot piece of glass and laid each dogs photo on the glass , masked everything and sand blasted it. Im going to make a frame and put leds to it. Just been busy with other stuff. Let me know what you think.

Whats up everyone. Im using a rotary engraver, vision ve-810 with signlab 9. I can engrave any lettering but it wint reconize jpegs, i tried converting it to bitmap. No luck. Anyone using signlab that had this problem ? Ive tried to vectorize it no luck. In corel u can export as many files. But vector isnt one

Had a customer bring me the magnets i madw him less then a year ago. The magnet material itself has a wrinkle in it. The rest of the rolls been used. No problems wirh any other magnet. Im going to try to slightly heat the front with my heat gun. Has anyone ran into this. Also what causes this. The back of the magnet was spotless. I also was very clear when i gave them to him to clean the truck before amd he did.

I don't know dakota. I cant find the box or paper wprl anywhere

Whats up everyone. Looking to make some extra cash, if anyone has any bulk decal orders that may be too large, i can help. I only van cut, no printing. Let me know what you may need. Im located in Pennsylvania, im paypal verified and heres a photo of some of my work.

Here's a few sublimation pillows I've made. I got these from China from a dealer off alobaba. A water bottle and aluminum dog tag. As of yet people are really loving them. With Xmas around the corner. Hoping to get some orders pushed out.

This is a sign for a new dog daycare near me. 4 color on poly carbonate. 29 3/4x 60 theybwere really happy with the outcome

How many people are turning pics into clip art ? Here's one I did of my dog.

Here's a few sublimation pillows I've made. I got these from China from a dealer off alobaba. A water bottle and aluminum dog tag. As of yet people are really loving them. With Xmas around the corner. Hoping to get some orders pushed out.

After my friend passed away last year his mom got me his finger print sent to me and I started work on it. This process was done in Corel , using the bspline tool. It took me about 6 hours or so with all the detail , and I wanted it to be perfect. After I was done I simply deleted the original image , grouped everything , and made it as small as possible. Then in the top I exported it as a jpg. After exporting I uploaded it in sure cuts a lot , stretched it to a reasonable size and ungrouped it , deleted all the layers that were not needed and saved it. Since I've added it to a beer mug etched , wall decal , and have the design ready for my screen printing. If you guys have any questions let me know

No problem. I discovered it a few years ago just messing around. You will find it a lot easier when your zoomed in to make sharper points , double tapping The mouse to get sharp angles and other things as you go. But let me know how it works out for you.

Just forget it lol obviously didn't understand what I said. I already did that.

My laser point 2 is cutting crazy designs of nothing when I tried to cut anything on it. A design ,or a simple letter. I noticed my roller motorswere kinda loud. I removed the bottom and pulled a motor harness off the motherboard and did a test cut. It worked perfectly. When I switched it won't with the other it worked also. But not when I had both in. I had a similar problem on my mh871 with the new motherboard. The white clip on the mother board that controlled the stepper motor on the blade holder was upside down reversing the polarity. So basically when I was cutting. The blade would be up when it needed to be down and down when it was supposed to be up. Anyone ever have a similar problem?

Why the machine won't cut with both motors hooked op. But cut fine with one.

It wouldn't of had the detail. Tries other processes. The original image was low quality. I'd rather take time and have the detail I wanted then try to quick work.