sheepdog

Members
  • Content Count

    75
  • Joined

  • Last visited

Posts posted by sheepdog


  1. Tater

    If you're wanting to engrave go to e-bay and look at #360153716076 which is a diamond engraving kit. $69.00  It has a diamond engraving pen, carrier plate and software.  It's the same one that came with my origional cutter but I never used it.  Maybe I'll see if I can locate it and give it a try.  Hope this gets you headed in the right way.


  2. The same thing happened to my MH365 a few months ago.  I removed the carrier cover to see if I could see anything binding.  Before when I turned it on the blade holder would not pick up.  After removing the cover I turned it on and it raised properly.  Of course it slambed into the side of the unit.  I moved it off the wall and put a pencil between the side and the carrier and turned it back on.  Put everything back together and it worked once or twice.  Took apart again.  It acted like something was causing it to bind.  Repeated test and worked great.  Put back together, worked once.  Took apart again.  Looked at everything.  Thought the spring was too weak.  Nothing made any sense.  When I put back together again I had dropped one of the cover screws so I only put two in figuring i would have to take apart again.  Worked fine and has ever since.  Don't know if something was in a bind or what but it's still working.  Don't know how your compares to mine but hopefully this will get you going. Lots of luck.