ainakeaboy
Members-
Content Count
64 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by ainakeaboy
-
Hey everyone , i just bought a egx 20 and wanted to know if anyone else has one of these machines ? Im new to engraving and bought this hoping to do custom dog tags and stuff , will this machine be suitable ? Any info or help will be appreciated . Thanks
-
Hey there , I was wondering if anyone has a wheel stripe vector for a 17 inch motorcycle rim ? Or can anyone customize one for me ? Any help on how to do this would be appreciated.thanks
-
Bought a usb to serial cable from radio shack and there hasnt been a problem since i switched . The answer is SWITCH TO SERIAL .
-
Im Having same probs , sending output to cutter and freezes ? Im using a usb connection . Is there a serial to usb ? I have a serial connection in the back of my laptop but its a female piece and the cutter is a female piece ? Any toughts ?
-
Hey y'all , i wanted to get into printing posters and was wondering if anyone has experience In this ? Is a epson 7600 good to print posters ? What software do you have to use ? What material to print on ? Qny hel would be appreciated . Thanks
-
Thanks for all the info . Does anyone one know what material they use to print the posters you buy in the stores ? Im thinking about the epson 7600 24" printer to do posters and stuff hopefully this deal comes true !
-
Are you looking to print one or two at a time? One at a time, low qty Are you looking for archival or short-term? The cheapest way What substrates do you think you'll need to print on? Poster paper/vinyl/banner What kind of coverage are you expecting to lay down? 24" Photos? Text? Both
-
I just got a 4 disc set of all kinds of Car,boats,atv,big rigs and motorcycles templates for cheap . Now my question is what are these used for ? How do i make them full size in signblazer ?It says 1/20 scale , so do i times the size by 20 to get full scale ? I attached a sample of what is on the disc, i deleted some of the stuff on there to make it small enough ,Hopefully somone knows how to actually put them to use . jimmy.EPS jimmy.EPS
-
So i times the original image size by 20 to get real life size ? I want to use the templates to do custom graphics for specific cars . Is this possible ?
-
Did a search but couldnt find topics on how to make a silhouette of somebodys picture not just an outline . Anyone has experience in doing this ?thanks
-
Color picture to vector silhouette instructions
ainakeaboy replied to ainakeaboy's topic in General discussion
I was actually looking for a "lazy mans way" of doing it . I guess there is no way around doing it node by node by node by node ........ well off i go to do a custom order i have . Will post pics of finished product. -
Color picture to vector silhouette instructions
ainakeaboy replied to ainakeaboy's topic in General discussion
Well it would be great if it can be done in SB but i just wanted to know the general idea behind doing it on any software . I just try to vectorize in SB but it doesnt come out very good . So any help on how to do it on any programs would be appreciated. Thanks -
Does any one use the vinyl roll holders that come with uscutter vinyl cutters ? I have them but dont know how to use them so the vinyl dont spool off the rolls . There is a rubber gasket that came with the holders but i dont know where they go ? Help !
-
Look on the left hand side , how many colors are there ?
-
Hey , I just got a cd with sports vectors and i cant seem to open them in signblazer ... I try opening them both ways but the download bar moves then it goes back to a blank page ? Please can someone try to get this to open in signblazer ? boston_redsox1.eps boston_redsox1.eps
-
Just bought a vector cd but eps files wont open ?? HELP !!
ainakeaboy replied to ainakeaboy's topic in SignBlazer
Thanks , Got the file to open now . Now i can actually use the disc i bought !! -
Just bought a vector cd but eps files wont open ?? HELP !!
ainakeaboy replied to ainakeaboy's topic in SignBlazer
Ok so I am using corel 9 and when i try to save it doesnt allow me to save as an eps file only other types ? Am i doing something wrong ? -
Just bought a vector cd but eps files wont open ?? HELP !!
ainakeaboy replied to ainakeaboy's topic in SignBlazer
So the only way to open it in SB is to open it in corel then save as an eps , then open it in SB ? -
Hey , Just received my lp 24" . Did all the steps to countour cut , vectorizing ,outlining etc. got to the part where you have to line up the laser . Locked in the right side , jogged to the left side locked that in ,cutter head went back to the right registration mark press cut and nothing happens ? Any ideas what im doing wrong ?
-
Looks good ! What would be a good embroidery machine to get your feet wet ?
-
new countour cutter wont cut ??
ainakeaboy replied to ainakeaboy's topic in LaserPoint Cutting Plotter Discussion
Yah, I'm impatient I guess lol -
new countour cutter wont cut ??
ainakeaboy replied to ainakeaboy's topic in LaserPoint Cutting Plotter Discussion
Did research on my own again . To make jogging in smaller increments you have to press 5 to toggle it on and off. Contour cutting here I come lol . -
new countour cutter wont cut ??
ainakeaboy replied to ainakeaboy's topic in LaserPoint Cutting Plotter Discussion
Did research on my own and found out the problem . Cut/mask prob and fixed it and did a contour cut yippie . Now another prob , when i load the paper i line it up with the first laser , but when i jog it to the left it doesnt jog on to the left reg mark in the middle , Like its off a little so when i cut the cut is off a little. Is there a jog button that moves only a little ? How do i fix this ? THanks -
New Video on contour cutting with US Cutter LP24
ainakeaboy replied to nenemott's topic in Instructional Contributions
Hey got it going but one problem , cant seem to line up the second reg mark . When jog it to the left it jogs to much so i cant hit the middle precisely . Any ideas ? -
New Video on contour cutting with US Cutter LP24
ainakeaboy replied to nenemott's topic in Instructional Contributions
Great vid . Too bad no sound instructions though one question ,Does it automatically print out those registration marks for you ?