-
Content Count
2,623 -
Joined
-
Last visited
-
Days Won
21
Posts posted by mb20music
-
-
-
does the blade spin freely in blade holder?
- 1
-
I hear powering off your vinyl cutter after each job may help as the budget/hobby cutters have very limited memory.
-
-
On 3/16/2018 at 2:44 PM, slice&dice said:Pens.
Well I would assume he is probably looking for ideas for things that he can do with a vinyl cutter and heat press, can't do pens with a vinyl cutter or heat press....
-
-
what exactly are you doing in Signblazer when it crashes on you?
- 1
-
7 minutes ago, Wildgoose said:Clear tape is sucky. Most pro's use paper tape.
When layering, clear tape makes it a lot easier if you ask me!
-
8 minutes ago, haumana said:depending what you're looking at to see what the "letters" are on the font, copy and paste works too.
Yes you are correct, that is a much easier way to do it. I tried to copy and paste and it didn't work for me the first time I tried, but I just tried it again and it worked...
- 1
-
In Signblazer, type this:
(alt)+0207
while holding down the alt key, type +0207
What you do is open Character Map then click on the desired symbol at the bottom it shows the "keystroke" for that particular symbol
- 1
-
JPSS Sofstretch
- 1
-
-
You can cover plain white ones in glitter vinyl
-
What vinyl cutter do you have? if you have one of the "budget" cutters you most likely won't be able to cut that small successfully.
But generally, when cutting very small you want to cut very slow, pressure you shouldn't have to adjust at all.
- 4
-
sounds like you need a new motherboard.
Do any of these look like your motherboard?
-
-
no, unless the design is bigger than the sheet, of course.
-
1 hour ago, cardudenc said:how old of a machine is the ce5000?
The CE5000 has been around since 2006, I believe the CE6000 came out in 2015.
- 1
-
42 minutes ago, Wildgoose said:Are you absolutely certain the 38400 is the correct baud rate? I have not had my P-Cut for several years but that seems off.
Should be 9600, I do believe
- 1
-
SignBlazer
You may or may not need to disable your virus software before downloading, file is completely SAFE to download.
http://www.uscuttersupport.com/downloads/Software/SignBlazer/signblazer_setup.exe
- 1
-
Maybe also try to contact Sawgrass and/or Silhouette
https://www.sawgrassink.com/Special-Pages/Contact-Sawgrass.aspx
email: support@silhouetteamerica.com
-
On 12/30/2017 at 3:23 PM, MZ SKEETER said:You have to buy a Graphtec FC vinyl cutter to get that feature.
OR Signwarehouse Q Series
-
On 12/30/2017 at 5:01 PM, bonsey said:Ah, I see. Guess I need to build my Paypal kitty up a little bit and get a Graphtec!!
A less expensive option if you want the "sheet cut" capability (also called cross cut) would be a Signwarehouse Q Series which is basically a Graphtec FC Series that is rebranded with the Signwarehouse name. The Signwarehouse Q Series 24" is about $1000 less than the Graphtec FC 24".
-
2 hours ago, Wildgoose said:What software are you running?
According to his other posts he uses VM LTR
- 2
Single tag states
in General discussion
Posted
she googled it and copy and pasted it lol