-
Content Count
627 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by Alien
-
For a new pattern like you are wanting I take 1/8 inch grid scientific graph paper and tape it to the item and trim and trace. When you take it off you have the exact layout with reference lines.
-
My first impression would have to be answered in the Mature section.
-
I just bought two boxes. Signwarehouse had the best deal i could find on stabillo pencils. I hate those peel type grease pencils for marking vinyl.
-
Points of swirls are getting crunched/lifted
Alien replied to motoxchic's topic in General discussion
When I change blades or remove it for cleaning the holder bearing i set my blade sticking out of the holder before i put it back in my machine. I get back up and running sooner this way. Put the blade in the holder so that it just barely sticks out. Take a piece of scrap viny and hold the holder in your hand vertical and drag it across the vinyl while putting downward pressure on the holder. If it does not cut all the way through i adjust the blade out. If it cuts through the backing i back off on the blade projecting out. Once u get used to holding the holder totally vertical it is easy to get the blade close before putting it in your machine and having to send a cut file several times to get it set. -
The percent mark is too large. It shifts focus away from the word Army. The Army is the point of the statement, not the percentage. Unless i am mis-reading the intent of the decal.
-
Thanks for all the dart graphics.
-
Make a new sheet larger than the graphics and put both graphics on the new sheet.You need both graphics inside the same file to get the sizing right. THEN copy and paste to a new file to cut them seperately. The appendages of the b and y are throwing off your numbers. Measure from the top of the u to the bottom of the m with the ruler and you will see what i mean.
-
FYI the Flour Pink does not look all that bright on the color chart either. However I can tell you that it is BRIGHT. I laid a finished shirt on the back of the couch and had to go back and turn it over. It is LOUD.
-
When mine starts doing the peeling thing I take the blade holder apart and get the small debris out of the bearing. You need a magnifing glass to see the fine debris but it will stop the blade from turning correctly. I washed it out with WD 40 and then cleaned the holder with 91 percent ISO alcohol. I do so much fine detail that i only use 60 degree blades in mine.
-
The way i figure it... my job is to give them what they want if possible...so long as they are paying for it!$$$$
-
I built mine from two recycled church doors. I got a double pane window replacement that someone ordered and did not pick up. Got it cheap. I put two 4' x 4 tube t8 light fixtures from lowes underneath one end. Table is 36" x 14'. The best price on a 14 foot cutting mat for it was GWJ in California.
-
Oracal 631 and use the app tape made for it!
-
But still beats the dirt nap.....IMHO
-
This message will need approval by a moderator before it can be posted?
Alien replied to AbsoluteAirbrush's topic in General discussion
All of mine are still in limbo. -
Welcome from West Tennessee
-
I live in the middle of that circle the weather people were talking about the other day,where it has not rained in over a month. And not much before that. The loggers are logging the deep swamp bottoms without getting stuck because it is so dry here. The trucks are covered in dust instead of mud. Last time they could get in there was 1985.
-
I have to admire someone who can wad up in those little cars and ride for half and hour or more to work in a space so tight i just cringe! And its just a normal day! This ol boy is too big for those little spaces. LOL
-
THANKS ALL
-
Robin Gibb, one-third of the Bee Gees, died Sunday after a long battle with cancer,
-
Course when it fades you can "hire your vinyl cutter person" to make you a NEW one...lol. You do need to talk to your insurance company though. Mine told me if my truck was used for business purposes that they would not insure it and I would have to get comercial insurance for it. So I am using custom graphics to call attention to it and when they ask who did it I give them my business card
-
Your orginal was too busy as well as too much fill. Think much more simple terms. Also FX makes me think of bicycle racing and movie effects not graphics. It alson needs to be something that does not confuse the people who are not in the business. Also print any ideas and stand back from them because what it looks like on the monitor upclose is not how it will look from a distance. And if you are going to use it for business cards and letterheads then it can not be too busy and unreadable when reduced for business cards. I'm on my third itteration now. It will take time to get it like you want it so dont rush it. And remember K.I.S.S keep it simple stupid.
-
get a magenta head cleaning cartridge from Richard @ Cobra. Take your magenta ciss cartridgeout and put the cleaning cartridge in, then clean the head several times. I had to use the clog buster solution and syringe on my printer to get it cleared out.
-
Where to purchase large metal sign material...
Alien replied to minivipr's topic in General discussion
I recently installed two poly-metal signs 4'x8'. Fast and easy to use. Just be sure and inspect the sheets inside the box before you sign for them, otherwise you bought them even if you can prove their forklift ran over them. If you sign for them they are yours. I am about to make 9 signs for schools. Poly-metal will be my substrate of choice. Only this time I am sending my truck to get them and bring them to the shop.