Jburns

Members
 View Profile  See their activity

  • Content Count

    726

  • Joined

  • Last visited

  • Days Won

    9

Posts posted by Jburns

  2. Font

    in Fonts

    Posted

    yes- nice angle-- If I have a chance tonight I can give it a shot-- - unless someone beats me to it.

    FYI Inkscape ( A free vector software download)  would probably give good results, with minimal node cleanup.

     

  3. Font

    in Fonts

    Posted

    someone may be able to but the issue is the angle of the photo- it would be distorted...

    Also...there is a name of a vinyl and graphics company just above the number?

  4. Posted

    Boy, that really looks like an MH series cutter.  You can try and download signblazer, ( links on this site) - and / or  see if an MH series driver will run it.

    maybe someone else can chime in, who has experience.

  10. Posted

    yes-- the roland you mentioned should be able to handle that project with clean results-- also for fine detail you will find Cast vinyl -751-- cuts and weeds much nicer than 651.

    while dialing in, practice on scrap with a few small square shapes, and Arial bold letters like TEST for offset. Be sure the cutting strip doesn't have gouges in it.

     

  13. Posted

    Ok then--

    make black layer, and include the crop marks as black vinyl-- weed and then apply whole thing to white vinyl.  - Place in machine then cut the next layer, which would read the crop marks and then cut the squares.

    verify that your software has this capability-- reading crop marks, and transferring a "bank" of decals to the white will be the hardest parts--i.e.

    The other solution may be to have them printed ( thermal / eco-solvent) if they are for outdoor.  try and install the finished product yourself also - see if end result would be acceptable to your customers.

    • Like 1

  14. Posted

    Would this be for a couple of designs for yourself on your vehicle, or would you wish to offer for sale?

    If its your own vehicle - you can just layer it on the bumper / window-- easiest.  If you want to layer them in your shop, t--o ship out you can try with the parchment paper method -- search forum (by member Wildgoose).

    If you want to cut and weed a grid of decals - overlay them all on say 24 inch white at once--THEN contour cut 3 x 11--- that will be tricky - Can your cutter and software read "Crop" marks?

    If you try and guess on the origin for final finish cut - the alignment for the squares wont be precise.

     

  18. Posted

    I have a Vision 1624 I picked up at auction-- -  (smaller 16" x 24")

    I have only ran some X/Y and Z movement tests  Probably going to get the software for it later this year..(1K).  My experience thus far is that they make heavy duty machines- and they are based out of Phoenix for support.- but not sure if they make a 4 x 8 machine.