Paradox

Finally worked it out with Levi, seems a setting on the plotter got scrambled. We had to change it then change it back before it all started working. Damnedest thing neither of us had seen anything like it before.

Anyone gotten SignBlazer to work with a refine on Windows 7 64 bit? I switched to a new computer and I seem to be having trouble getting it to communicate via Serial port to the refine. I've checked all the usual suspects and still nothing.

Looks like my daughter is heading over to ETSU for her last two years. Anyone got a Bucky I can make for her?

Let's talk.

I don't think a image can be slanderous or libel that usually involves spoken or written word. http://en.wikipedia.org/wiki/Defamation

50mA x 100 led's = 5000mA 5000mA = 5A 5 Amps is not much to real with, a lot of the solar stuff will handle that.

Real or vinyl? I assume vinyl since this is a vinyl forum, if real tell them you can do it in a couple of years and start practicing with the hairy brush now!

LED's are between 20 mA and 50 mA if I remember right. Not as much draw as a bulb.

I'm betting the Easyweed extra which is made for nylon will do better.I doubt the vinyl would be flexible enough to stay on for long. I'd go heat press.

At 42" that's a projector and brush job if I've ever seen one. You could also also use some wicked airbrush paint from Createx and use a mini detail gun from harbor freight with some loose shields to fill that in. To finish it off you could stripe it with a brush.

Error in the Keyboard interface?

Uhhh if it's cutting twice there may be two paths. I'm using inkscape without that issue all the time. Might have to adjust the nut behind the keyboard to get the computer to work right sometimes. Make sure the "black lines" are not the fill area between two paths, otherwise it would cut down the middle of the path no matter the thickness of the line.

Shhhhh.... he was put in the witless protection program.

Cool, airbrush the bleach before you put the heat press on. to avoid the pooling. Of course the vinyl will pool like a mother.

Now wait, let's all cut him some slack. His friend might work at the FBI...... He might sweep the floor.