signyouup
-
Content Count
500 -
Joined
-
Last visited
-
Days Won
3
Everything posted by signyouup
-
Cutting Problems using Vinylmaster with Foison C24
signyouup replied to Clubtek's topic in VinylMaster CUT, LTR, PRO & DSR
Have you set your origin(zero) on the cutter? -
Yellow and "What?" make Red!
-
Would this work? https://www.youtube.com/watch?v=C-XkNFL_OKw
-
Never done it but sounds like a blade killer to me
-
Omron is who makes the timer.
-
I think a little more space between graphics and the edge of the window on the top and bottom..
-
The only time anyone beats Mark to the punch is when he's not near a computer!
-
Nice Torch!
-
or get a good scan of the photos at a high resolution.
-
Is there a Baudrate setting?
-
That's all I can remember "PETA" standing for. Nice job!
-
Does the SC require a null modem cable?
-
Sign Blazers Elements - Cutting a large image in to multiple sections
signyouup replied to Pebbles1488's topic in SignBlazer
Do the tiling in the design software so you can break it into 2 separate jobs. -
I mix rubbing alcohol(91%) and water 50/50 and add a few drops of baby shampoo to a spray bottle.
-
Vinyl removal = $80/hr because I don't want to do it.
-
The blade wont go down all the way!
signyouup replied to WDD's topic in SC Series Vinyl Cutter Discussions
I with it looks crooked crowd. -
titan 2 on sale wow
signyouup replied to Primal Decals's topic in TITAN 2 Series Vinyl Cutter Discussions
I think the pinch roller issue was on one of the bigger ones. -
The thing about blueprints is there are usually multiple line widths.
-
New from Southern California with questions too
signyouup replied to marebear1956's topic in Introductions
For cutting the Mylar on your machine you could try using multiple passes on the cuts. -
1. Are the grit roller setscrews tight? 2. Are you pulling the vinyl off the roll before cutting?
-
Who's is a contraction of "who is" Whose denotes possession.
-
Here's my 10 minute try but it's going to take a lot of cleanup. Here's a link to what I did to the image plus a little Gaussian blur. http://www.gimpusers.com/tutorials/che-guevara-effect dude table.eps
-
Suggestions required for cutting pin stripes and thin strips on vinyl cutter
signyouup replied to kainth.c.s's topic in General Help
If the tracking is in question, will the stripes be the same width at each end? -
I cannot access punch out!?!
signyouup replied to yenned45's topic in VinylMaster CUT, LTR, PRO & DSR
It might only be available in certain versions. -
Nice!
