-
Content Count
500 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Gallery
Everything posted by signyouup
-
You can't get it to move from the control panel? Does it make any noise?
-
Vinyl backing paper and some spray adhesive?
-
It's probably port settings. See instructions in link below. Looks like "Flow control" needs to be set to hardware. http://www.signtools4.com/Foison_C-24.htm
- 1 reply
-
- signblazer
- foison
-
(and 2 more)
Tagged with:
-
Try a little less force. Maybe the Red is running on the thin side and you are cutting a hair to deep.
-
Post a pic of the rims when they're done.
-
patterns for seats? or upholstery
signyouup replied to mikeybgoode's topic in Other Software Programs
For a single use pattern use vinyl. Cut, weed and apply transfer tape. Then apply it to the fabric or the fabric to the vinyl/transfer tape(whichever works best) and cut along the edges of the vinyl. -
Make a copy of the top layer and weld to the bottom layer?
-
Glad you got it straightened out.
-
Printhead Alignment?
-
If there is a big difference between where the decals are and the rest of the RV cut the decals a little oversize so alignment won't be as critical..
-
Awesome!
-
Titanic?
-
VinyMaster Combine imports to one
signyouup replied to NLalo1's topic in TITAN 2 Series Vinyl Cutter Discussions
You must convert the letters to curves before you can weld them. -
Installation Disc Lost, need to installer plotter to new PC
signyouup replied to Mace's topic in Roland Cutting Plotter Discussion
http://www.foison.net.cn/en/download.asp -
It's one of those things you do so infrequently. Iknew what to do right away but it took a little while to find it.
-
Right click on one of the files and chose open with. Select the program you want to use to open the file, you may have to use the browse button to find it. Make sure the box is checked next to "Always use the selected program to open this kind of file". Click "Ok".
-
https://www.vecteezy.com/free-vector/anvil
-
Looking for a cutting software, Roland compatible
signyouup replied to Macee80's topic in General discussion
http://www.uscutter.com/VinylMasterCut-Software-Value -
Relationship between Jog Settings vs. X and Y Scale
signyouup replied to EAWF's topic in Creation PCUT Cutting Plotter Discussion
Draw a 10"x10" square and then cut it. Measure it in the X direction and divide that number by 10. That is your "X scale" Measure it in the Y direction and divide that number by 10. That is your "Y scale" Some software will let your enter the size it's supposed to be and the size it actually cut and do the above math for you. -
Best way to cut off a 24" roll of vinyl
signyouup replied to Daveischosen's topic in USCutter Refine Cutting Plotter Discussion
I'm with you Arty! -
Need info Help with this type of install
signyouup replied to Primal Decals's topic in Off Topic Section
What Slice said about "Dominant". Even if you could get it to adhere well it would look odd unless you were looking at it straight on. If those are double pane windows the inserts may be inside the window. -
Script fonts: 1. Convert to curves. 2. Node edit to clean up connections between letters 3. Weld them all together.
-
Looking for my PERFECT Cutter...HELP?
signyouup replied to RCMelton82's topic in TITAN Series Vinyl Cutter Discussions
Could just 2 copies of whats supposed to be cut in the file right on top of each other?