KYSIGN

You may be able to use Big City font or Broadmoor they may need some work. Hopefully someone else can find an exact match.

My mail carrier decided that this package had to fit or else. My wife ripped the mailbox off trying to get it out.

I never had luck with plastic tape. They all seem to tunnel when exposed to any temperature or humidity change.

My guess is the line segments are seen as separate paths. You would need to join them somehow.

It could have been caused by a water repellant such as rainx. The temperature could have caused adhesive issues. I normally tell my customers to wait 72 hours before washing their vehicles to allow the adhesive to fully bond. I also try to avoid the wiper area entirely if possible.

Have you tried using the step and repeat option to create a few actual copies on the workspace?

New Rocker font is similar. Maybe you can use it as a starting point.

This is the first time I have used Siser Glitter HTV. I pressed at 320F for 15 seconds and peeled warm as per Sisers online instructions. It looks like some adhesive was left behind from the carrier. I have never had this problem from Siser easyweed. Any suggestions? Maybe I should peel cold or use less heat?

I think it's Latino Rumba We Come to Ride

Lots of them popping up on a local fb group. They are already in a price war and racing toward zero profit. I haven't seen anyone offering copyright designs yet but it's only a matter of time.

You'll make quite a stain when they crush you for copyright infringement. Good luck with that.

They need to start selling cheese to go with all the wine. ☺

My graphtec has a lock to stop the rollers. You could probably use a piece of tape or a clamp to stop them.

Remember to pre press the shirt for a few seconds first to remove moisture. The color should return to normal as the shirt cools and the moisture returns.

My mobile browser started blocking the forums today. I get the following message. I just bypass the warning and it works fine. I just wanted to let the administration know.

If a website asks you to install a file converter or download manager it's probably malware.

The step and repeat window should work. I'm not sure if there is another way.

http://www.rolanddg.com/product/archives/fj-600_500/spec.html It looks like an aqueous printer.

I would love a cheap 3d printer for personal use but they all seem to have poor reliability. It's always complaints about motherboard failure and/or extruder failure.

Tracking can be an issue at that length. Prefeeding the material can help sometimes.

It's easy to list on eBay. Most of the decal product images are simulated. You just overlay your design onto a picture of a wall or window and export to a web friendly format.

Wow. I can't believe I missed that. That's what I get for skimming.

What sign?

You could try putting the blade holder higher up in the clamp. I did this when I used a MH721. I had a gap roughly the thickness of a penny between the blade tip and vinyl.

File a copyright complaint with etsy regarding your designs. Report the Disney copyright violation directly to Disney.