Anytime72

Will this car be at the Custom Works Open Wheel Championship race next month?

You did a few shirts for me and I sent you an email about them. You never responded. Thanks

I know Corel can't open a PDF that is protected but flexign can. Not sure if this helps.

I would like a copy of Carbon Fiber in Black if possible. Thanks

I tried to install a copy on another older laptop, it's not hooked upo to the internet and I cannot get the program to start. I've tried several times tonight to get this problem resolved. The same thing happens regardless of what I do. The cutter goes to the right nd smacks the red buttons and the feed rollers move the material away from the machine and continue to run and the display on the machine show waiting. Too bad the software (Signcut) looks good and looks like it would compliment the Laserpoint cutter. Last call. Is there anything in the driver that can be altered to make this work......................

Also forgot to mention this but when using Corel I cannot use the application launcher for sign-it/Sign cut. And just so I know I'm not missing anything what is the correct driver to use? Thanks

Well it's a new day and I will not be able to try again until later tonight so I'm hopig someone from Signcut or US cutter can chime in a give some new suggestions before I get home tonight. I'm running out of patience with this software.

I also received a return that my email did not go through. Does anyone from Signcut respond to emails or return with good advice?

Thanks Again............What do you mean be the setting the driver?

Paco, Thanks for the help and th steps. I believe I have done this along with every other possible scenerio. It is pretty straight forward and I can't see where I'm going wrong and where the problem are. Are there any settings in the cutter set up screen that I can try to change that might help?

you are correct, Every time I try to do anything the rollers move the mterial backwards and the cutter moves to the right and hits the red buttons. I've tried many different things maybe I'm missing something. I walked away and tried it again a few hours later still no luck. Can someone do a step by step walk through on origin the cutter and doing a test cut. It still can cut from Sign blazer but I would like to use the corel feature and possibly the contour cut feature if I can get the basics to work. Thanks Walter

Does anyone have any ideas on how to get this software to work with this cutter? Every time I try to cut an image or do a test cut it runs off and hits the red button on the right side of the cuter (facing machine). I tried to look everywhere on this forum and tried most suggestions and no luck. I've installed a copy of Sign Blazer and it works without any problems. I tried to make sure that both setings on both softwares are the same. Way too many hours testing and trying out different things for something that you purchase and should work out of the box. Thanks in advance. Walter

Northern New Jersey

I would like a copy. Wstuber@verizon.net

it's hard to beat a team that was nearly perfect at all of the Chase races. It's even harder to better yourself each year and win for the 3rd start season. Hats off to them. I'm also a Harvick fan and i can say also that Kyle Busch has grown on me through the year.