MZ SKEETER

what cutting software are you using? Have you cut the same design before with no problems? Have you made sure there are not alot of extra nodes in the design,, Is it cleaned up good?

now your getting down to it Bill , great job... these Graphtecs are great

ok ,, I was reading elsewhere about 64 bits and not working even with Vista I was talking about US Cutter ticket. and support at the top of this page, SUBMIT A TICKET The Graphtec has a driver for 64 bit, but don't know if it would work for you. It is also under downloads on this page. http://support.uscutter.com/

ok, sorry, I just don't understand why it will work for you on XP and not on Windows 7. As I stated I don't use windows 7 but most people said it was better. Did you ever put in a support ticket, so the techs can remote your computer? , I would go that route, I can't think of anything to help ya. I think we have covered everything I only user Flexi myself,, And like it alot,

what does this mean, your statement above about not loading Flexi? are you saying you don't have Flexi installed in Windows 7? The cutting software FLEXI HAS to be downloaded and installed before you can continue doing anything... THAT is the very first thing you have to do. It is downloaded and installed isn't it ,in WINDOWS 7?

ok, maybe you can go this way.... Download Signblazer it is free software, and the download can be found on the forum, see if you can run from that?

have you tried any of those other drivers in Flexi?, like the Creation the king cut, and some others?,,, maybe should I thought you bought that cutter new from US Cutter and it was on of their Refine MH721 cutters

I didn't open that file, but it says P-cut, which is not the same as a refine.. Did you try the P-cut driver? So do you have a P-cut or a refine?

ok when right clicking the USB2 in your device manager in "properties" at the very bottom does it say this device is working properly? ON THE GENERAL tab,, also in the right click list do you have scan for hardware changes?

in your windows 7 device manager, have you tried right clicking the USB serial 2 and seeing what the properties are? does it say it is working properly? If not are trouble shooting from there? Going thru the troubleshoot program that windows has. Have you tried to download BOTH of those drivers that in support downloads?, There is an executable one and a manual one. Or maybe uninstall and try it again...

sorry, at this point, I don't know what else to tell you, put in a support ticket and they can remote your computer and see what the problem is.

they have them listed on their site. http://www.cleancutblade.com/ http://www.cleancutblade.com/ct_catalog.htm

If you are using Signblazer, start with an offset of .25 and work at .05 intervals of + plus or -minus, see which way gets better for you, make sure your blade and blade holder are free of vinyl pieces, and blade moves freely.... blade only out about the 1/2 the thickness of a credit card, barely see it. run cutter slow.

start with your offset at .25 then work at .05 intervals going + if it goes worse then start going minus- How did you come up with 0-7.0? Read the newbie manual. It will help you with alot..

very nice

maybe post some of your files to look at, Have you cut the files before and now they crash? or never have cut them? Maybe they still have raster in them and are not totally vectorized...

I like this one, plan and simple. Thanks Midwaste I would never just put stuff like that on the instructions, they get thrown away. I also want it on the invoice. Maybe we could start a link for just items like this, useful disclaimers and such. Call it legalese. Thanks everyone, much appreciated! P I also list a disclaimer on my store header and every ad that I have decals/graphics for sale on the internet,,, So, they can read that upfront before they make a purchase. There is no gray areas that way.. It is right on the ad they purchase from. in very LARGE lettering.

I use USB WITH MY CUTTER I use windows XP and mine shows up under UNIVERSAL SERIAL BUS CONTROLLER AT THE VERY BOTTOM of the device manager list, try expanding there.., when I plug my USB cable for my cutter in, it says USB PRINTING SUPPORT. try looking there and right click it , or else put a ticket in, When you installed your Flexi, Did you open PRODUCTION MANAGER and enter your setup? What Brand and Model did you select? and when you plug your USB cable into your computer with the cutter turned on. , does it say FOUND NEW HARDWARE ? also have you tried a different USB cable? Have you cut with Flexi on a different computer before going to the Windows7?

a-ok

cheap on EBAY, but not as large as you are wanting , but I'm sure you can search for more http://cgi.ebay.com/Cricut-WHITE-Static-Cling-Window-Vinyl-1-9-X-12_W0QQitemZ120480332501QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item1c0d2ffad5

I do all RTA and I wrote this myself. . and I put this on the bottom of my install instructions AND IT IS CIRCLED IN black. PLEASE READ........................ THE APPLICATION OF VINYL REQUIRES A DEGREE OF SKILL, DEXTERITY, PATIENCE AND CONCENTRATION. IF YOU FEEL YOU CANNOT APPLY THE DECAL YOURSELF, MOST AUTO DETAILERS AND BODY SHOPS WILL APPLY THEM FOR A FEE. WE CANNOT BE HELD RESPONSIBLE FOR REPLACING DECALS THAT HAVE BEEN DAMAGED DURING APPLICATION. APPLICATION IS PURCHASERS RESPONSIBILITY ONLY, THANKS FOR YOUR BUSINESS...

you can find fonts easier if you go to a seach engine like www.dogpile.com and do a search all I did was use keywords parade font free and numerous places come up with the choices, is this what you are looking for? http://www.searchfreefonts.com/font/parade.htm

very very nice, great job, keep on showing us more

so you got it working and your cutter is working now? maybe you could leave your solution here for others to read.. , So it could help them,

maybe here http://www.clker.com/search/letter+greek/1