MZ SKEETER

Cutters are set up the same way.... they even have the same FTDI drivers. http://support.uscutter.com/index.php?_m=downloads&_a=view

are you going thru these instructions? http://support.uscutter.com/index.php?_m=knowledgebase&_a=viewarticle&kbarticleid=16

your welcome

here is Forum member Boosted pictures of decals he made using His Pcut and Flexistarter8.6 with contour cutting. http://forum.uscutter.com/index.php/topic,28166.msg221923.html#msg221923

actually I will enlighten you,, You can contour cut On the MH series. with Flexistarter 8.6 with contour cutting. I don't know about Signcut. You have to purchase this copy of Flexistarter 8.6 for $129. Dont' get the one that is $99, thinking you will save money. The $99 version is NOT contour cutting version. Boosted did that thinking he was saving money.. LOL Then he had to go back and order the right one. Then take a loss on the first one he bought LOL And I gave him the right link. LOL Forum user Boosted is using it with his Pcut. He posted pictures a while back. I turned him on to it. http://cgi.ebay.com/FlexiStarter-Contour-Cutting-Vinyl-Cutter-flexi-starter-/280532048622? cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item4151035aee do you feel enlightened now?

vertical text, just type the letter and hit enter after each letter,, will place the letter below each letter http://forum.uscutter.com/index.php/topic,8347.0.html

if you have no problems on Xp, I would put it back to XP, I run my cutters on XP. And actually purchase, back up xp laptops. This is on a dedicated computer, for cutting only. They are more stable. Flexi 8.1 Is not even Vista compatible. , which could be your problem. Did not become Vista compatible until version 8.5 and your trying to run it on even a newer system then Vista.

have you checked here? http://support.uscutter.com/index.php?_m=downloads&_a=view&parentcategoryid=5&pcid=0&nav=0 What cutting software are you using? SignBlazer? Flexi? What cutter are you selecting in the cutting software when setting up?

where do you live Wayne? also,, have you checked your area Craigslist for any great deals on vinyl cutters? these are desperate times for some people. There are also alot of people who bought cutters and only used them a few times, cutting vinyl wasn't their thing after all. And they are just sitting around taking up room.

turn your weeding options off, it takes more memory with weeding options, also possible to upgrade the memory chip

I would still submit a ticket.

Is this a brand new machine? If so, get ahold of tech support http://support.uscutter.com/index.php?_m=tickets&_a=submit

I doubt that you will get an answer, he hasn't been on since May 2010

try a keyspan adapter you can probably find it local also. plenty online different stores. http://cgi.ebay.com/NEW-Keyspan-High-Speed-USB-Serial-Adapter-USA-19HS-/120420154018?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item1c0999baa2

thanks for the laugh

download the Flexi driver pack from the US Cutter support area , if you haven't already

what cutting software are you using with your vinyl cutter? Corel 4 is a design software, you also need a cutting software.

welcome , you can still do contour cutting on your MH http://cgi.ebay.com/FlexiStarter-Contour-Cutting-Vinyl-Cutter-flexi-starter-/280532048622?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item4151035aee

yes, remove the masking tape. Welcome

if your expecting more than a hobby/craft cutter (as stated by the US Cutter tech support) you had better upgrade before making this purchase of the MH Series. my 2c.

I have a 30" cutter and have never wished I had a smaller one. And never needed larger either. 30-34" is great. I do fullside vehicle graphics

glad to hear it...

yes, real close...

where in Indiana? I am in North Manchester

are you closer to Washington State or Memphis, TN? If closer to Memphis, maybe you might try the sister site, and can get your items faster, http://signuniverse.com/