-
Content Count
17,509 -
Joined
-
Last visited
-
Days Won
497
Content Type
Profiles
Forums
Gallery
Everything posted by MZ SKEETER
-
can't you do that in your software to 1 color? put it on wireframe. select all to 1 color I use Flexistarter 8.6. That is how I do it.
-
just download the .eps. alot easier to work with, http://www.brandsoftheworld.com/logo/kent-state-golden-flashes
-
Kinda depends on what operating system you are putting it on. Flexi 7.5 is for xp on down.. And you will have to find the driver for your cutter. Not sure if it's on Flexi 7.5 maybe can use a generic driver.
-
your welcome, this guide was done by a forum member to get people started, great info there.
-
You can purchase Flexistarter 8.6 with contour cutting. On Ebay. User Boosted is using it with his Pcut. http://cgi.ebay.com/FlexiStarter-Contour-Cutting-Vinyl-Cutter-flexi-starter-/270609750678?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item3f01991a96
-
you should really start here... http://forum.uscutter.com/index.php/topic,17489.0.html
-
well, just ask US Cutter.... send them an email and ask for your info. If you haven't already.
-
the word Nismo is on best brands Joe Camaro or Drakesis are for hire.
-
CREATION PCUT CT1200 - CUTTING PROBLEMS
MZ SKEETER replied to rvargas831's topic in General discussion
as example only : a usb thumb drive/ flash drive http://cgi.ebay.com/NEW-Kingston-4GB-DataTraveler-102-USB-Flash-Drive-N-/400117694409?cmd=ViewItem&hash=item5d28df7fc9 -
Barber shop window that I recently completed
MZ SKEETER replied to warrior35's topic in Show your work
very nice -
in the support section http://support.uscutter.com/index.php?_m=downloads&_a=view&parentcategoryid=5&pcid=0&nav=0
-
yes, many people are using it with windows 7
-
To get yourself going again, you could download the trial Signcut for 7 days. Flexistarter Mac is only for Mac. not windows also. http://cgi.ebay.com/MAC-Flexi-Starter-8-5-vinyl-cutter-Flexistarter-SIGN-/270613156133?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item3f01cd1125 Some people don't have any problems on windows USB, others do. A Keyspan adapter can be used . I have also seen problems with the Mac dropping. , thus the Keyspan adapter worked for them also. No matter what system you use. You need to ground your cutter to your cutter stand for vinyl static to release.
-
Was it acting like this before you purchased it? Did you see it cut before buying? Do a search for battery test, and try it. Is the carriage head in the track, the white wheels, are they firmly in their track?
-
here it is from US CUtter in Washington State. But if you live closer to Memphis Tenn. You might want to try the sister site www.SignUniverse.com http://www.uscutter.com/Graphtec-CE5000-Series-Vinyl-Cutter_p_125.html
-
Corners are not cutting square - please help
MZ SKEETER replied to MikeOswald's topic in General Help
I have never used overcut.. My Graphtec cuts perfect as is... I use Flexistarter 8.6 and 0 offset. -
How to ground MH-871
MZ SKEETER replied to Michelaua's topic in USCutter Refine Cutting Plotter Support Requests
Here is also a great newbie manual, to get you going in the right direction http://www.customracingdecal.com/manuals/Noob-V4_9.pdf -
page set up? Graphtec ce5000-60 I am missing my cuts from the edges?
MZ SKEETER replied to wayne1234's topic in Inkscape
I don't know anyone who cuts directly from inkcape... guess your on your own. I use Flexistarter. -
Can someone help me with a Military Police eps
MZ SKEETER replied to Countryside Graphics's topic in Graphic Requests
Alot of people are busy, and it is the weekend... you may have to put the job up for hire... -
page set up? Graphtec ce5000-60 I am missing my cuts from the edges?
MZ SKEETER replied to wayne1234's topic in Inkscape
Read the specs for your cutter to find cutting areas. look at the Graphtec site. Just past the little padlock is where you can change mm, inches etc. in inkscape. Depending on what cutting software you are using, is where you actually scale your image for cutting. Such as import your image them decide what size you want to cut it. Height x width. -
I have used them before. Alot of goodies there
-
please help nobody knows what wrong as my settings seem to be the same as theres
MZ SKEETER replied to silvertrx's topic in Creation PCUT Cutting Plotter Support Requests
have you made sure all your belts are tight http://forum.uscutter.com/index.php/topic,14904.0.html -
maybe look thru here http://all-silhouettes.com/
-
Seiki has a forum also,,,
-
go to dafont.com and go thru their dingbats. might find some