-
Content Count
17,516 -
Joined
-
Last visited
-
Days Won
497
Content Type
Profiles
Forums
Gallery
Everything posted by MZ SKEETER
-
What would you consider a fair asking price for a used FC7000 54"
MZ SKEETER replied to MikeOswald's topic in GraphTec Cutting Plotter Discussion
I actually started my business with a 30" cutter and still maintain the need for a 30" But have never needed larger than 30" 54" is a huge machine. I just measured my machine... even though it is a 30" the actual width of my machine is almost 50" You had better have alot of room for it. -
What would you consider a fair asking price for a used FC7000 54"
MZ SKEETER replied to MikeOswald's topic in GraphTec Cutting Plotter Discussion
that just kinda depends on how fast they want to move it. Seeing as how the business.. Is out of business. maybe it didn't ran so much LOL I run mine almost every day, and it works great and is like new... -
Blade carriage does not accept blade
MZ SKEETER replied to BennettUA's topic in USCutter Refine Cutting Plotter Support Requests
and not only that. your gonna need spare blades, If your planning on doing much work. -
What would you consider a fair asking price for a used FC7000 54"
MZ SKEETER replied to MikeOswald's topic in GraphTec Cutting Plotter Discussion
It would have came with Cutting Master2 and they could have just imported from Illy or Corel plugin also. My Fc7000 model was new in Feb,2008. Don't know how many years they made the FC7000, probably 2007 also and possibly earlier. New now in 2009 came out the Fc8000 -
What would you consider a fair asking price for a used FC7000 54"
MZ SKEETER replied to MikeOswald's topic in GraphTec Cutting Plotter Discussion
John , the title of thread says it is a FC7000 54" so it is HUGE!!! -
Copam cp 2500 and Mac
MZ SKEETER replied to jangele84's topic in Copam Cutting Plotter Support Requests
most people on this forum love their Copam ...Yes, a Graphtec and a Roland are better at set up. Your paying alot more for less aggravation. I will agree with that. and much easier to install on windows than Mac. I personally have a 30" Graphtec. and love it. never a problem. -
Copam cp 2500 and Mac
MZ SKEETER replied to jangele84's topic in Copam Cutting Plotter Support Requests
Is this your first vinyl cutter? Your welcome...this all has a learning curve. first off,, requires patience.... And YES, you will have more problems. No Doubt..these are machines. And with lower end machines you are self taught...,Or spend thousands for a vinyl cutter and go to a show room and have them train you on the spot.. Many dealers selling vinyl cutters offer about ZERO in support. And many of those purchasers are also here trying to get help. THERE is a TON of questions asked and answered on this forum for most any problem, but you have to do a little searching for it. -
Copam cp 2500 and Mac
MZ SKEETER replied to jangele84's topic in Copam Cutting Plotter Support Requests
Your welcome. not sure without you posting the file. Or maybe your blade is out too far touching the vinyl. Only needs to be barely seen. this Newbie manual can help you alot , If you have not read it already you can download it from the first page http://forum.uscutter.com/index.php/topic,17489.0.html -
Signcut Pro Already Registerd
MZ SKEETER replied to thebuttontaylor's topic in Criticism and Complaints about USCutter
we all have worked our way up from hobby cutters.. We have made good money from our HOBBY cutters and bought Professional cutters. I still have my Seiki vinyl cutter from 4 years ago and now use a 30" Graphtec I bought over 3 years ago. NO, we didn't buy Pro at the beginning. -
Blade carriage does not accept blade
MZ SKEETER replied to BennettUA's topic in USCutter Refine Cutting Plotter Support Requests
Ok, well the manual calls that piece a blade carriage, and I wanted to be as specific as possible. I took lots of pictures and even video for the support to see what I mean. If it's not called the blade carriage, they shouldn't say so in the (revised) manual. the Newbie Manual is a contribution from forum member Paco...from the Netherlands. Not US CUtter,, and his terminoligy is a bit different than ours. But he did a very good job with it. this manual has helped MANY new people just starting out... -
Blade carriage does not accept blade
MZ SKEETER replied to BennettUA's topic in USCutter Refine Cutting Plotter Support Requests
you don't need a new carriage, You need a blade holder......big difference.. get the equipment name right. carriage http://www.uscutter.com/US-Cutter-MH-Carriage-_p_10.html blade holder http://www.uscutter.com/US-Cutter-MH-Blade-Holder_p_12.html -
hey US... heres a f******G tip!
MZ SKEETER replied to scarecrowglass's topic in Criticism and Complaints about USCutter
he also might have thought if he bought the guitar. He would have been Santana the next day ....LOL -
hey US... heres a f******G tip!
MZ SKEETER replied to scarecrowglass's topic in Criticism and Complaints about USCutter
Most of the cutters purchased on EBAY do not come with Signcut. You would have had to purchase on the US CUTTER website. which also includes a better warranty on the machine. -
when you hit the cutter button (in sb), it should give you a preview of what section your about to cut, if not, make sure you have the proper layer selected (upper left side), also check the size, it shows at the bottom of the screen the object dimensions
-
your .eps file has to be a version 8.eps or older to work in Signblazer. If you have Illy just convert it to an older .eps
-
Vinyl Pulling off when Cutting
MZ SKEETER replied to Stlouistech's topic in Creation PCUT Cutting Plotter Discussion
for a more quality machine to cut that small, you would need a Graphtec or Roland. but glad you got it on the correct settings now.. -
Copam CP-2500 Setup Problems
MZ SKEETER replied to williamssignco's topic in Copam Cutting Plotter Discussion
submit a ticket to US cutter, for help in the support section -
Copam CP-2500 Setup Problems
MZ SKEETER replied to williamssignco's topic in Copam Cutting Plotter Discussion
on what version of windows? -
Copam CP-2500 Setup Problems
MZ SKEETER replied to williamssignco's topic in Copam Cutting Plotter Discussion
ok, what version of Flexi? on what version of windows? Have you downloaded the latest Flexi driver pack? http://support.uscutter.com/index.php?_m=downloads&_a=viewdownload&downloaditemid=44&nav=0,4 -
Copam cp 2500 and Mac
MZ SKEETER replied to jangele84's topic in Copam Cutting Plotter Support Requests
USB comes with all cutters. Some use it for windows with no problems. Just depends on your system. -
Copam CP-2500 Setup Problems
MZ SKEETER replied to williamssignco's topic in Copam Cutting Plotter Discussion
your question has been answered already,, KEYSPAN ADAPTER. http://forum.uscutter.com/index.php/topic,29883.msg234173.html#msg234173 -
Copam cp 2500 and Mac
MZ SKEETER replied to jangele84's topic in Copam Cutting Plotter Support Requests
just go purchase a Keyspan adapter, that is the brand name and can be purchased on line at alot of places. Just enter Keyspan adapter in the search on here, has helped alot of people ... -
Vinyl Pulling off when Cutting
MZ SKEETER replied to Stlouistech's topic in Creation PCUT Cutting Plotter Discussion
the 24" is a Mh721, It might not make a difference, but then It might make alot of difference in your cutting You could also try the Roland Pnc1000 that is a generic driver used in a lot of cutters -
Vinyl Pulling off when Cutting
MZ SKEETER replied to Stlouistech's topic in Creation PCUT Cutting Plotter Discussion
An EcoCut is not a Creation PCUT, like you stated. The brand is a Refine. So what did you set it on in your cutting software? That could be your problem. It would be the same as an MH series. All along we thought we were trying to work with a Creation Pcut. right here, it says Refine EcoCut on the frame http://www.uscutter.com/USCutter-EcoCut-Vinyl-Cutter_p_1652.html -
Vinyl Pulling off when Cutting
MZ SKEETER replied to Stlouistech's topic in Creation PCUT Cutting Plotter Discussion
he also stated it did it on big graphics