• Content Count

  • Joined

  • Last visited

  • Days Won


MZ SKEETER last won the day on May 13

MZ SKEETER had the most liked content!

Community Reputation

3,648 Excellent


  • Rank

Profile Information

  • Gender

Recent Profile Visitors

47,207 profile views
  1. You will not see the name of the cutter beside the com port#. Unplug it and see which one unplugs. It should be a Com #. Look in your computer device manager. Did you download the driver and extract it and run it? You must. Did you try a different USB cable? We always advise to put the value cutters on a Tripp-lite Keyspan Adapter, that is the brand name. Better connection. The value cutters have a cheap Chinese chip set in it. Not TRUE USB like higher end cutters.
  2. Here is all of the info for your cutter. Including trouble shooting. Here is your support for SCALP 3
  3. We do not know which version of Laserpointer you have. The first Laserpointer was a CreationPcut with a laser on it. 2nd was a Laserpointer 2 which was made by Liyu. The laser is for manual contour cutting. After you print your design with registration marks, you jog the carriage head to each printed registration mark and record in your cutting software. You would need a printer that prints on vinyl for that. Drivers and instructions can be found at the website under SUPPORT. Fuse> You hope if the cutter gets an electrical charge, that the fuse would blow and not hurt the vinyl cutter.
  4. Here is a video from Vinyl Master
  5. Then it should have the vector program in it. Contact UScutter tech support or Vinyl Master tech support.
  6. Where did you buy your version of Vinyl Master Cut? If directly from Vinyl Master website, then it does not have the vector program in it for Vinyl Master Cut. Only the UScutter version of Vinyl Master Cut has the vector program.

    Buyer beware

    Are you sure it doesn't have a paper strip to peel off? Every review that I am reading on UScutter, says MH strip does not have tape or glue to hold it down. Can't send it to you, if they don't have it. Waiting a year is way past contacting time , unreasonable from you to expect.

    What is contour cutting?

    An ARMS cutter is a contour cutter. Arms cutter has auto registration mark system. Like Graphtec, Roland, Summa, It reads the printed registrations marks with a laser automatically. A cutter like the Sc model has a laser attached to it and you have to jog the carriage head, laser around to each printed registration mark and manually record it in your cutting software. They both contour cut,

    Lynx PII60

    Graphtecs do. On my computers XP and 7. I didn't put them there. They all installed there. Not sure if the Lynx Pii-60 is like the Lynx S-60 I did find a user manual for the Lynx S-60 on a competitor website. But no user manual for the Pii60

    Need Help.Flexi Sign And Redsail

    Sorry, but no one is going to help you with pirated/counterfeit software. Maybe try free to help you with your designs. Then save as an .eps file and import into Signblazer.

    Need Help.Flexi Sign And Redsail

    Legal Flexisignpro 8.1 has a USB dongle. And every version after that. That USB dongle has the user ID and password in it. The legal version will not even allow the software to open without the USB dongle in the computer com port. Flexisignpro 8.1 is the most pirated software out there. . Show a picture of the USB dongle in your computer lit up like it should be. .This is a picture of Flexi 10, but you can see at the bottom of the picture, the USB dongle. All legal Flexisignpro software has A USB dongle. Also the other picture is of a legal version of Flexisignpro, with the USB dongle NOT in the com port. You will get this error until you put the USB dongle into the com port of the computer your using. This is how you know that you have legal Flexi products.

    Need Help.Flexi Sign And Redsail

    A USB dongle is like a flash drive or thumb drive in your com port on your computer. Similar to this photo. The user Id and password is in it to make the Flexisign8.1 work. Do you have this in your computer when Flexisignpro 8.1 is working? ONLY legal Flexisignpro 8.1 software has the USB dongle. Flexisignpro 8.1 is forWindows XP and older Windows.

    15" x 50 yards UNPUNCHED vinyl available anywhere?

    Great, I have purchased from since 2006. I have always had great service. Glad to help!

    15" x 50 yards UNPUNCHED vinyl available anywhere?

    General Formulations vinyl is punched and unpunched. SMART500 As well as Avery vinyl 15" x 50 yd Sold at EarlMich .com

    Need Help.Flexi Sign And Redsail

    If he gave you a Flexisignpro 8.1 and it does not have a USB dongle, that goes in your com port and lights up, to make the software open, then the software is pirated/counterfeit. Can you show us a picture of the USB dongle? Also Flexisignpro8.1 is for operating systems XP and lower.