Dakotagrafx

Super Moderators
  • Content Count

    21,363
  • Joined

  • Last visited

  • Days Won

    640

Everything posted by Dakotagrafx

  1. Dakotagrafx

    pressure not working

    The laserpoint knife holder has a o-ring inside of it that keeps it from changing - is that missing? if not I would check and see if the blade is moving freely in the holder - is it sticking and not seating all the say to the bottom when inserted? if so some light wight oil will help that. the blade should be pulled into the holder the last little bit by a magnet.
  2. Dakotagrafx

    FORD THUNDER LOGO

    Thats why I asked - he must have and I couldn't' find it
  3. Dakotagrafx

    Finished 2 more signs today.

    Great Job Vette done in my best web impersonation!
  4. Dakotagrafx

    Graphic Request Info

    I've got nothing in that category, sorry
  5. Dakotagrafx

    A note about this board

    Welcome back Billy, I didn't know you "back then" but have learned a lot from your post!
  6. Dakotagrafx

    help!!!!!!

    here is your original - I didn't do anything to it header.eps header.eps
  7. Dakotagrafx

    copam setup

    oh we all still ask questions as we never stop learning!
  8. Dakotagrafx

    copam setup

    grounding is always a good idea - just run a small wire from the cutter to the stand anywhere drivers http://support.uscutter.com/index.php?_m=downloads&_a=view&parentcategoryid=3&pcid=0&nav=0 or in flexi http://support.uscutter.com/index.php?_m=downloads&_a=viewdownload&downloaditemid=44&nav=0,4 if not just use the om-60 driver - works great unplugging not a problem
  9. plug it in - turn on your cutting software and cut - it will recognize it and install the drive for you
  10. Dakotagrafx

    help!!!!!!

    I just imported it into flexi and it wasn't a problem - needs cleanup but it would cut
  11. Dakotagrafx

    Valentines Day Card

    very nice work!
  12. Dakotagrafx

    overlaping vinly

    here is one posted a while back add registration marks Foghorn003.eps Foghorn003.eps
  13. Dakotagrafx

    I NEED SEVERAL LARGE PICTURES PRINTED

    my old boss at the GIS shop gave me good advise - Always respond to calls and emails out of courtesy if nothing else. the advise has served me well!
  14. Dakotagrafx

    help!!!!!!

    did you select the verctorized part of the image before exporting it to the eps? sounds like you somehow saved the raster image. would also help if you could post the final eps
  15. Dakotagrafx

    6 panel hat

    Was answering without my glasses again - didn't read you already had one. it just makes it so you do not have to change it - and for a heat press and hat press you can do about the same money as a 6in1
  16. Dakotagrafx

    compressor for sand blasting

    The compressors are never big enough - better with a pressure feed system but they still use a lot of air. I think maybe with one of those the road crew uses you wouldn't have the wait time
  17. Dakotagrafx

    tried to shave the cat today

    You are so in for pee, poop or hairball in your bed tonight!
  18. Dakotagrafx

    Transfers turning dark

    are you using a pigmented ink or a dye based?
  19. Dakotagrafx

    6 panel hat

    you will be much happier with a dedicated hat press - never heard too many happy campers with the 6 in 1
  20. Dakotagrafx

    DESK TOP PRINTER GRAPHICS

    http://forum.uscutter.com/index.php/topic,7141.0.
  21. Dakotagrafx

    Where do you buy your Oracal Metallic 851/951 vinyl?

    signwarehouse - quick ship to my location!
  22. Dakotagrafx

    FORD THUNDER LOGO

    I tried it right after he posted and couldn't find it - did you BScoenfelder?
  23. Dakotagrafx

    FAVOR from all hunters PLEASE

    Ohhhh Wait till summer - we are in a county with a lot of lakes and out of state vacationers. I always wondered why we have a tourist season and we can't hunt them!