angel48e

i have a pcut creation which i havent used in a couple months. now im trying to use it and im getting a error message. ----an internet connection is required to validate FlexiSTARTER P-Cut Edition 8.5v1. If it cannot get validated now, your software license will expire. I have an internet connection but every time i try to open the pcut software i get this message. I dont know what to do.

I tried it all the settings for the press speed, the blade adjustment and i just cant seem to get it to work What do i do next?

On a regular machine cutting 4year vinyl what should the setting be

My pcut ctn630 just doesnt seem to be cutting all the way thru. I adjusted the blade I am not using a laptop I am not using the usb, I am using the serial port I checked the cutting strip it ok I need help my machine is new im not sure if there are some settings or something i am missing It cuts ok on straight runs but when it turns or does circles it doesnt seem to be cutting all the way thru

I need to repeat the same cut one on top of the other CAN I DO THIS

It doesnt cut all the way thru on curves, on straight runs in cuts fine and it doesnt do it on the same spot. My blade is i nthe back.

Thanks I think the connection is fine I am not using a usb cable, and i am not using a laptop. It does cut on the curves but it just doesnt go all the way thru

I bought a pcut ctn 630. I messed around with the setting and the blade adjustment but i just cant seem to be cutting correctly. it cuts fine on straight runs but on curves it doesnt cut all the way thru and it seems to get wavy sometimes. Please help

my machine cuts fine on straight runs but does not seem to cut all the way thru on curves or circles.