snapchris

http://www.youtube.com/watch?v=4I_MQBnOe9c

http://www.youtube.com/watch?v=HU4srf6UQVQ

Unfortunately I dont. I just have that old version of flexi 8.1, signcut and corel draw X5. What do you mean by software setting?

all clear.

when the arm is up it wont cut anything, even with close to maximum force. thats why I think the arm is not fuctioning at all.

is there a certain vertical position the arm should be in? Like all the way up or down? that seems weird to me. And also the amount of force seems off as well.

just tried that. same thing. test cuts dont work either. Either it doesnt cut deep enough or its dragging. Looks like Im gonna have to call.

I spent a pretty penny on the Graphtec in 06. In 09 I had to sell it to help pay some bills. I wish I never got rid of it. It was awesome. I set it. Cut the the vinyl by hand until it just marks the backing paper. The blade is set very low. Barely peeking out.

thanks for the help BTW. I appreciate it. I thought the hardest thing would be putting the thing together. I was wrong.

Yes carriage head is firmly in track. I manually adjusted the blade. I used to own a Graphtec years ago. Cutting strip is fine. So you think it could be Flexi? I did the same thing in SignCut as well.

my bad.tried to delete and couldnt.

Windows 7 Flexisign 8.1 & Tried SignCut Drivers from the website Serial Connection Grounded to stand Blade barely sticking out I just received my new SC cutter, hooked it up and tested it. Speed 400 and force at 100. It cuts nothing in the vinyl. The blade isnt even close to the vinyl. If I adjust the force to 600 it drags the blade and cuts very uneven. Real deep on one side and nothing on the other end but it still leaves drag marks. Any other settings, I either get no cut in the vinyl or the same uneven cuts. Could there be something wrong with the blade arm not going up and down? It doesnt seem to move up and down at all. Ive tried everything that I can think of. Please help!

Windows 7 Flexisign 8.1 & Tried SignCut Drivers from the website Serial Connection Grounded to stand Blade barely sticking out I just received my cutter, hooked it up and tested it. Speed 400 and force at 100. It cuts nothing in the vinyl. If I adjust the force to 400 it drags the blade and cuts very uneven. Real deep on one side and nothing on the other end but it still leaves drag marks. Any other settings, I either get no cut in the vinyl or the same uneven cuts. Could there be something wrong with the blade arm not going up and down? It doesnt seem to move at all. Ive tried everything that I can think of. Please help.