Teamxdmatt

Members
  • Content Count

    10
  • Joined

  • Last visited

Community Reputation

0 Neutral

About Teamxdmatt

  • Rank
    Member
  1. I have a 34" Sc series i've had for about 6 months now everything has been ok i used usb to start but i had that issue with it stopping and cutting a diagonal line in the middle of a job just recently so i bought a keyspan and im still getting the same result sometimes. i had a 12"x12" logo i needed to cut that has some detail to it and the project manager just stood at 65% never went above that. it would stop cutting and then the blade would stay down and it would try to cut a line in the whole roll of viny luckily i stopped it before that happened. i don't have no screensavers on or anything so nothing should be interrupting it. I did however install everything on a old desktop with a serial and it seems to be ok its not what i want to do but i just dont know why all of the sudden it wont work on my laptop correctly. i'm tired of wasting vinyl
  2. Teamxdmatt

    Oracal 651 matte black issues

    what's the best place to get the main tape from ? i don't have a problem getting matte black off the backing if i peel the backing off the tape .. these people ive been dealing with must be impatient or give up the minute a letter wont come off.
  3. Teamxdmatt

    Oracal 651 matte black issues

    i think its just the people are being picky about it cause they can't peel it off fast and try to peel the tape off the backing. if i peel the backing off the tape i have no problems.
  4. Teamxdmatt

    Oracal 651 matte black issues

    the cutter is relatively brand new.. its the SC series 34" cutter. maybe 2 months old now. i'll try it anyways.. appreciate the advice
  5. Teamxdmatt

    Oracal 651 matte black issues

    its weird though i have no problems with no other colors just this. there is just a faint outline on the backing if i get the vinyl off .. sometimes it comes off sometimes it dont
  6. Teamxdmatt

    Oracal 651 matte black issues

    i'm having people complain the vinyl won't come off the backing i know its not cutting too deep already adjusted etc . i'm using R tape conform high tac. i tell people to peel the backing off the tape and say it takes forever that way or still don't work. some have also said the wax backing is comming up with the tape . im wondering if i have a bad roll? would a switch in tape to the oracal ht55 fix anything? i'm lost i want to fix this issue and i've tried everything .
  7. Teamxdmatt

    Layering vinyl advice (pre-assembling)

    i was doing it the way he is but i had quite a few bubbles in between the layers.. i wasn't using clear tape just paper
  8. Teamxdmatt

    Layering vinyl advice (pre-assembling)

    I had a customer that wanted a 2 color decal made and one of them came out perfect and the other one has bubbles between the layers.. how can i prevent this? i'm pre-assembling these and they get shipped out i know it isn't the best idea to pre assemble but that's what i was told to do. i know you cant really spray and fluid on it and have to do it dry from what i keep reading about.. the decal is 6" x 33" .. all im doing to the top layer is taking the backing off and re-applying the backing with just the registration marks showing so i can apply it to the reg marks on the bottom color. Then i take that backing off and start putting it over the bottom color slowly while trying to squeegee it somewhat..
  9. Teamxdmatt

    Sc series jagged lines ?

    i thought it didn't look right .. it even plotted the same way so i just wanted to make sure i wasn't going crazy lol .. appreciate the help! i'm new to this whole thing so i wanted another opinion on this so i knew for sure
  10. Teamxdmatt

    Sc series jagged lines ?

    Hi everyone i just bought an sc series cutter / bundle that was on ebay 34" model.. i've been doing alot of testing and i keep getting jagged lines (vertical) in what i'm trying to cut and its getting frustrating i've tried different pressure, changed the offset to 0 etc. but could it be this file? the vertical lines don't look absolutely straight. i cut it out of the flexi starter i received . file is attached .. thanks for the help! Sundown eps.EPS