beachnsled

I am not sure if this is relevant, but I will give it a shot. We have an FC 7000 75; we recently updated to the new Corel Draw (2108) & we are running windows 10. When I cross check for new versions of Cutting Master its not clear what we should be using. Version 2 no longer works; Version 3 indicates its for FC7000 MK2 & version 4 doesn't list our cutter at all. My husband has installed both 3 & 4 (uninstalling previous versions each time) & nothing works. We are losing our collective minds. Please help!

Good morning! Anyone own or ever one a Summa printer/cutter? (if there was a competitor printer area I could post in, I would post there). Thanks!!!

Anyone... Bueller, Bueller, Thanks in advance!

Why thank you!!! Cheers!

Hey all... having the same issue with my profile pic - want to upload one & I cannot.

Thanks to all who helped us back in April! We were able to figure everything out & the cutter has been working PERFECT up until about 4 days ago. We seem to have run into a similar issue, the cuts are jagged (although, less of a "loose" jagged & more of a "straight" jagged appearance - if that makes any sense). Also, the machine is making a very strange noise. We took apart the blade & housing to ensure that it was clean & free of any loose vinyl, dust etc. Not sure what the issue is, as it has been working great. Any ideas? Below is a sample of what its now doing...

Thanks to everyone!

I did forget to mention that we had the vinyl wrinkle up on us a few times binding up the cutter and stopping the machine when we were cutting a long run. I am assuming that this could do damage to the holder and or the carriage. I checked the carriage and it seems to be tight, although when I slide it down the track I can feel what seems to be a little bit of resistance roughly every five inches not perfectly smooth. The belt seems to be tight. As for the blade holder the blade does have some movement a the tip. Is there any tolerance for blade movement at the tip? When applying pressure to the blade extractor the blade does get hung up and not pop out. The blade does spin freely though.

Thanks.... I will start there.

Hello again... thanks for the replies so far. Here is an image of the most recent cut - created in CorelDrawX5 & exported to the cutter - it appears to be very very wobbly, not just jagged. Re: the carriage, I will check that, however I hate to say this, we just don't know how to tell. The "trouble shooting" section of our user manual is pretty much zero help - doesn't explain much of anything. I should note that we did change the blade for fear that it could have been dulling & we checked to see if it was loose (again, not even sure how to tell, other than visually noticing wobbling) Thanks again.. I will check back.

Hello Very very new to the world of Vinyl Cutting. We just bought a GC Expert 24 (will be upgrading eventually - no doubt!) - its about a month old. When we first starting using our cutter we had minimal issues. Slowly we are getting very very jagged/curvy edges on what should be clean cuts (our most recent was a sign created in Corel - direct export to the cutter). We also had some graphics hand vectored for us by Vector Magic - which also cut beautifully at first - but are now all a jagged mess (we were told that there is some sort of a compatibilty issue with AI & the software we have for the cutter). We have reached out to the GCC customer service (by phone & email) and we cannot get any real help (not to mention that the user manual is really no help). Any advice that we can get would be very very appreciated.