MillsRacing77

Members
  • Content Count

    8
  • Joined

  • Last visited

Everything posted by MillsRacing77

  1. MillsRacing77

    Test Cut on my MH1351

    Fixed it! Took the Front Cover off and the bolt had come loose... And th enut was stuck to the new Magnet... Thanks
  2. MillsRacing77

    Test Cut on my MH1351

    My test cuts are not right.. The diamond inside of the box is not even a diamond looks terrible.. My Cutter does not finish at the other end of a letter does not finish the cut i should say..i have to finish the cut with my xacto.. Im getting frustrated and Need Answers.. THANKS!!
  3. MillsRacing77

    Test Cut on my MH1351

    yes they are I have had this thing about a year now... but never has done this....
  4. My Cutter is dragging the blade.. I can see where it is cutting i lift up vinyl you cant even tell it done anything... I need to fix this asap.. And order a part or something... What do i need... its a 53' cutter..
  5. MillsRacing77

    My Us Cutter is dragging the Blade

    its on a concrete floor.. grounded correctly..
  6. MillsRacing77

    My Us Cutter is dragging the Blade

    sounds right.. it does not move up or down...
  7. MillsRacing77

    My Us Cutter is dragging the Blade

    My cutter is 53' Mh/1351 cutter..
  8. MillsRacing77

    My Us Cutter is dragging the Blade

    The blade does not raise or do anything... The holder is not raising.. does not pick up blade period..