michaelphay87

i still need help with this all i want to cut is the yellow and the black i am confused on how to do it

i have talked with uscutter everytime i call about keyspans they always tell me most times its setting and it should always work usb

okay so as you all know i bought my cutter for 100 bucks after calling us cutter 2 weeks ago... they messed up my order and sent the wrong part...while they were sending me a new one i figured i would give it a look..by this time i took over to my dad house which is where we are doing the shirts and everything else.my dad use to work on card shufflers we stared with the rollers and figured out that the roller would move before the gear on the end would move so we took ity apart and figured out that the nuts on the end were loose. so after that she was good to go

:laugh: :laugh:

here is the pic i want to use

welcome here now i just gotta ask if that your car in the display

okay so i got a hold of uscutter they told me to hit test on the machine and this is what came out they told me it was the carriage or the motherboard so i purchased a carriage.......they sent me the wrong part so as i wait for the new one i would see if you guys had a better idea of what the issue is might be so this is just by hitting the test button on the machine without the computer hooked up

what was your cutter doing as mine has had some issues to ? the only way to get best results out of uscutter is to call the answered me in less the 5 minutes at least you got the right board i ordered a carriage for mine and got a pen holder this was yesterday called them and they said they will send the right one to fix the board you need to filp it over and take out the bottom its in there i think am still new to good luck i hope we both fix our problems

just make sure you hit orgin because if you dont it wont start there

sweet look good except one thing its a metro lol well at least it gets good gas......... my take on good gas was a gsxr 1000 with about 180 horse power i think my bike gets around 38 mpg with about a 10 sec quarter

so i just bought this thing and i tried a few cuts and this what came out 2 really messed up stars i am using signblazer and am totally new to this but but i have picked up alot so far so can some tell me what the cutter is doing wrong if its making really cappy cuts like this ??

you know what i have to stop and thank the forum on this one lol i answered a question in stead of ask yaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa go me

http://screencast.com/t/pcuthE87JJK http://screencast.com/t/0nr0Wi1E5QG ill get one in one sec of me doing it my self this is for a 2 color image

what you need to do is wait a sec brb

well i text him and said hey im not looking for my money back but i just need some help he then informed me that the plotter was messing up and thats why he sold it i guess he called uscutter and they told him it was the axis carriage chip so all in alll should i assume that this is the problem and buy it or should i call uscutter and get support ?? here is the chip http://www.uscutter.com/index/page/product/product_id/1406/product_name/Z-Axis+Carriage+Chip+for+MH+Series+Cutter

i have a mh 871 34 inch which has 1 mb memory

okay well i got the down low on the cutter i showed the pictures to them and let me see into my problem i hit the test button on the cutter and it was still messing up so he called the manager over and he said i was the carriage itself or the mother board so i bought the carriage as soon as it gets here i will replace it and see....if that isnt the problem i will buy the motherboard but i hope the mother board will come with the 4mb memory instead of the 1mb so i will only really be speeding 40 omn the motherboard........... as for testing it before i purchased it he didnt have any vinyl in it but did pug it in and did a pen plot and it did a perfect square which seemed to me okay ............ okay i still dont think it was a bad buy 100 bucks plus 25 plus 80 is 205 for a cutter or 269 plus shipping...

sweet i was just a kid when i layed my eyes on a kawi and love the green and monster just did it in for me.... i bought a 99 kx 250 for 750 bucks that was running well as fate would have it he didnt have mixed gas when i came to buy it so he filled it up with reg gas and 5 laps at the track bang (shaddy fnnnnnnnnnnn people on craigslist ) so i rebuilt it myself and new plastics and now race with my dad on vintage races

i was thinking the same thing i will call as soon as i get up

off topic but what is your kx i got a 99 250 i just rebuilt

well the keyspan is not the root of my problem it still does the same thing i even went ahead and did the tv logo agian via usb to make sure it was still doing the problem........... could the rollers be to to tight or they are not loose at all. ??? i need a major boost right now

okay i was told to get a keyspna but can i just go to best buy and buy a 15 dollar one instead of the keyspan one for 30 ???

thanks guys i went to bestbuy today and bought a usb to serial port to see if it works wish me luck lol

will it say on the package if it does or not

id stay far away from that looks like a crappy built place with probly like drywall screws holding it together lol