joebiv318

Members
  • Content Count

    48
  • Joined

  • Last visited

Everything posted by joebiv318

  1. joebiv318

    Windows - Laser Cut

    I have a new computer with windows 7 (64-bit). What is the BEST Sign Blazer download to do? I have my original disk from like 4 years ago but that must be outdated. I have found many down loads on here but just wondering which one is currently the best? Thanks!
  2. joebiv318

    Windows - Laser Cut

    I didnt set up any offset. Would that be the blade offset? Right now it is at 0.00, you say to try it at0.25? I cant even get my other computer to load up to check the old setting.
  3. joebiv318

    Windows - Laser Cut

    Also after looking at my "test" it appears as though the closing points are pretty sloppy. It was not like that on the other computer? Looks like small "hooks" where the knife just starts to cut and doesn't always come back to close the gap?
  4. joebiv318

    Windows - Laser Cut

    Ok I was able to do this except for the "patch" it seams to be working on first test? What exactly does the patch do?
  5. joebiv318

    White Space

    I am trying to remove a small space around an overlapping object. Ive tried all the outline and stuff like that but it just leaves a space than another Black outline. I found exactly what I want to do under the SignBlazer help menu. It is called "white space". It says go under arrange, or pick from the tool bar, well its not there. My guess is this is not on the "free trial". Any other way to do this?
  6. joebiv318

    White Space

    Ok this is just something i found online. If you look at the upper left part of the cross you can see the gap between the cross and the red flame. This is what I'm wanting to do. Now take this one step further...say i want to add a Red outline to that cross and then have the gap to keep the two same colors from overlapping with each other. This is what i did, I out lined the cross once with my out line than i outlined it again for my "space". I then punched through(the flame) and removed the second out line. This left me with the first out line and the white space where the second outline was. This seemed to work fine until you cut it and find that it also punches through the first out line as well and you have an extra "cut". Does anyone know a better way to do this?
  7. joebiv318

    White Space

    So I searched a few different terms and found this... http://forum.uscutter.com/index.php/topic,16104.0.html it works, wish the "white Space" option was there it would be easier but this gets the job done.
  8. joebiv318

    typochondriac font

    Does anyone know where I can get this for free, or a font that is very close?
  9. I'm trying to cut Three different decals that I have saved in SB at the same time.(same color) When I have One up, and go to open the next one up, the first one disappears? I cant figure this out?
  10. joebiv318

    how to cut multiple projects at the same time

    Jay, Thank you! This is exactly what I was trying to do!!!
  11. joebiv318

    how to cut multiple projects at the same time

    well that's not really going to work. I'm looking more like...so I have Two 4" decals of a football and Three 7" logos for a company, and One 11" sticker for a window. I want to arrange them to all be cut at the same time, the same color, wasting the least amount of vinyl possible.
  12. joebiv318

    customer care guide

    does anyone have a guide that they give their customers after you apply the vinyl to their vehicles on how to care for it that you wouldn't mind sharing? i just want to be able to cover all my bases so that my customers will be well informed and not come back at me and say something like "you never told me not to pressure wash it" thanks
  13. joebiv318

    customer care guide

    thanks!! exactly what i've been looking for!
  14. So I had my laser cutter working good w/ a usb hook up. Then one day my computer stopped working, just wont turn on. so instead of getting that one fixed (almost 6 years old) I bought a new one w/ a serial port. So now I need to know how to get the cutter to work with the serial port, I thought that I had it hook up right but I just get blocks on the cutter screen when I turn it on. Thanks
  15. Well I got the new mother board and my cutter is now working again I was hoping that the mother board would make my laser work since it never worked but that is not the case. Also on a side note... Found it, thank you. New part will ship out today. This was on 9-4, when really the part wasn't shipped till 9-11 one week or 5 business days later. That's 12 business days after they received it, not including the holiday. Now I know ken gets the dirty end of the stick on theses forums and Levi said Ken was gone that week, but there is a shipping dept. This is a recurring problem, maybe someone should look into it.
  16. It was sent from Union Dale Pa 18470 here is the tracking info if that helps... Label/Receipt Number: 0306 3030 0001 2960 3147 Status: Delivered Your item was delivered at 12:09 PM on August 25, 2008 in WOODINVILLE, WA 98072.
  17. Do you have a tracking #?
  18. Thanks Levi, please send out the replacement as soon as possible. I believe is put ATTN: Ken/Levi on the package
  19. Don't know about the OP but mine doesn't look anything like your roller. And no I didn't get the stand.
  20. Looks like you received the mother board yesterday. Just a friendly reminder.
  21. The rollers don't seem to attach to anything. My guess is that on the Pcut they have a slot that they attach to. I bought my cutter off Ebay and when I was looking at the Pcut the roll holder was listed in the description, but was not listed on the laser cutter, so I just figured it as an extra surprise. I do try to use the holder but it doesn't work that well. I think if I get into doing this w/ any volume I might buy a better holder or build something.
  22. I won a bid on a 24" laser cutter on ebay and also a mystery pack of vinyl. Both auctions say that there could be a discount in shipping if another item is purchased. So I sent Two messages to (uscutter?) on sending an invoice w/ the discounted shipping so I can pay for the items. I havent gotten a response back at all. Also I must have called 10X and pushed every prompt possible and even though it says "normal bussiness hours" I still get voice mail every time. I'm a little to busy to leave a message and wait for a phone call back. So I have no experience w/ a vinyl cutter and will more than likely need their tech support. I cant get anyone to help me PAY for the items whats going to happen when I need help on using it once I get it. I have a really bad feeling here.
  23. Ok do I need an RA#? Do I just send it in? What do I do?
  24. Well Levi, Ken. Its well after 12 noon there and no response as to what to do?
  25. Well Levi @us cutter did call and we went over a few things. Tech support said the cutter should not have those boxes even not being hook to the computer. So they are going to figure out what to do next and let me know by Tomorrow.