JustMe

WELL i'M REALLY NOT NEW BUT MAYBE NEW TO LOTS OF U . i'VE HAD MY CUTTER ABOUT 3 YEARS NOW AND i ONLY FOLLOW THE FORUM WHEN i HAVE TROUBLE,. i HAVE A mH721 WITH SIGNCIT SOFTWARE. IT'S BEEN A YEAR SINCE I'VE ANY TROUBLE THAT I COULDN'T FIGURE IT OUT MYSELF, SO I'MMMMM BAAAACK.......

No this is not the 1st time I've had it almost 2 years. It is a MH 721

I have a Mh 721 I've had it about 2 years now but the knife is only scoreing the surface not cutting all the thru the vinyl. I changed the blade 3 times so its not the blade. I've also adjusted it several times. I'm not sure but does the knife suppose to automatically come up from the vinyl whenever it moves. I believes thats whats causing the scribbling because it never comes up when it moves across the vinyl.

ANYBODY ONLINE?? NEWBIE NEEDS HELP. MY KNIFE IS SCRIBLING ALL OVER THE VINYL BUT NOT CUTING THROUGHT THE VINYL I'VE ADJUSTMENTS BUT TO NO AVAIL. ANY ADVICE

I GUESS I'M A NEWBIE IT'S BEEN QUITE A WHILE SINCE I'VE BEEN ON. ANYONE FROM MISSISSIPPI DURING SCREENPRINTING OR CAD CUTTING. I HAVE A MH721 AND NEED SOME HELP LIKE TODAY. YOU DON'T HAVE TO BE FROM MISS. BUT JUST THOUGHT I'D LIKE TO MEET SOMEONE FROM THIS AREA.

Thanks everyone :( Got that now I need to know how to vectorizr a plain black and white graphic

Thanks ! after I trace it do I mthen save it still in ai or eps? :(

Hello, I'm new at this but I can catch on pretty easy. I have MH721 and I use signcut and corel 13. I need some istep by step instructions on vectorizing. Thanks a bunch

I've had my cutter since December done very little work on it and having problems. I can get the vinyl to move forward and backward when I press move on the cutter but when I press for the cutter to move in place it just makes a low noise and want move at all any suggestions?

Sounds as though you are having the same problem that I had but I got it resolved by myself. When you drop the blade into the holder be sure to adjust the brass knob up as far as you can first which will the allow the knife to be to far downward and knife then tighten the silver metal screw afterward continue to adjust the brass knob until u have the blade at the right adjustment . I thought my bladeholder was broken but that is not your problem don't spend any mopney yet.

Hello Beardown and Tater, I'm having problems trying to import from corel to signcut. I am using corel 12 and there is no place to save in eps, I tried Ai that didn't work either any suggestions??? By the way thanks for the info on my blade I eventually got it to working right.

I'm sorry it's the eSpeed Vale it only goes to number 8 Look on the welcome screen on the plotter by the Baud

What is the eSpeed Vale number suppose to be set to and what is it's purpose? Does the blade suppose to show all the time after you adjust it or just when its cutting. The only time my blade shows is when you push the skinny metal tip on the blade holder ???

Hey Tater I'm a female and I wasn't actullay turning the "blade" but the nuts that hold the blade ???

I have turning the blade a lit and a lot is there such as the blade going breaking??? I don't think the blade ia even coming out once it presses against the vinyl