SignJunky

Members
  • Content Count

    123
  • Joined

  • Last visited

Everything posted by SignJunky

  1. I just upgraded my printer from SP 300 to the VP 300 a few weeks ago. I'm running into a problem as to where the width is perfect, but the length is coming up about 1/4" short on prints over 40" long....... I've changed the setting in VersaWorks to "Use Printer Settings" and on the printer menu itself ( calibration ), it's set to "0.00" ........ is there anything else I can try?? Thanks
  2. SignJunky

    Aurora Graphics

    I'm looking to get some Aurora Graphics artwork cds. Mainly interested in Digital Flags and the camo. Does anybody have any for sale or know of a site that has some good offers? Thanks
  3. Some of my prints that I do on aluminum blanks have a splotchy look in the print...... hard to explain and I can't get a good picture to show at the moment...... but it's the most noticeable in black and red ink..... the prints look like it has clouds in it...... I use very high quality images..... and it's not every time. Not sure if I need to increase press or temp. I'm currently at a pressure of 1 on a Hix..... and temp of 400.
  4. SignJunky

    Prints Look splotchy or cloudy looking

    no spray..... I use tape to hold the plates in place.
  5. SignJunky

    Prints Look splotchy or cloudy looking

    I went back and checked the temp all over in several places..... reading was the same across the whole top plate which is great news..... it is a little bit dirty, so I'll be ordering something to clean that with. I increased my pressure and my next print turned out better than the one I did earlier. I did forget to mention that I was pressing at 400 for ( 60 seconds ). Not sure if the time is a factor or not. for my protection sheets, I use the paper backing that comes off of vinyl rolls...... would that affect anything??
  6. SignJunky

    Prints Look splotchy or cloudy looking

    I'll try to increase pressure...... using same blanks and actually tried some others. I get same results from both blanks..... I checked my heat with one of those actual gauges and it's dead on...... let me try the heavier press. Thanks for input!!
  7. SignJunky

    Mug

    Is she available for hire? LOL..... nice looking!!
  8. SignJunky

    Fork Lift Vinyl

    thanks
  9. SignJunky

    Fork Lift Vinyl

    What you guys suggest to use for vinyl going on forklifts..... it'll just be numbers around 20" size.
  10. SignJunky

    Roller Skating

    Got a business owner wanting pics of kids roller skating. Single skaters type designs so that they can be individually cut and made into some sort of " merry - go round " thing for Christmas. I found a couple that I vectorized from online, but needing about 6 different ones if possible. Anybody got something they can share? Thanks
  11. Is there a way to manually change the size of a job in versa works without it being proportional? For example, if I have something that measures 12x12...... but want to change it to 12x13...... is there a way to do that?? Thanks
  12. Yea, that's what I had been doing, but thought maybe there was a shortcut / trick. lol.... thanks
  13. SignJunky

    How to ??? segment a circle

    Dang..... I miss read from the very beginning. lol...... I read it as 2 and not 20.... my bad. haha
  14. SignJunky

    How to ??? segment a circle

    Make you a circle....... then make a 2 point horizontal line as wide as the circle....... then highlight both, the circle and the line and click "control c' then control e..... that will center and even both objects together....... then use your smart fill tool and click on one half of the circle..... there are other ways as well, but just one quick way.
  15. SignJunky

    Help with font. Pic attached

    Looking for a font close to the one in this pic "Rudy's". Thanks for the help.
  16. SignJunky

    Help with font. Pic attached

    Thanks.... yea, it's very close...... just that the edges were very jagged. I cleaned them up so I'm good. Thanks to both
  17. SignJunky

    Help with font. Pic attached

    I downloaded online, but my text is jagged???
  18. SignJunky

    Application Tape

    If you are going to be doing any shipping, I stand by the Rtape Conform..... this stuff doesn't tunnel like some of the other brands I have used.
  19. SignJunky

    4'x8' Sign

    I know price depends on region, but if buying the materials, how do you guys price this? Do you just figure your material cost then add labor or do you price according to other competitors?
  20. SignJunky

    1989 Jeep Template of hood

    I have a customer that wants a black matte vinyl cut to go on his hood of his jeep. I'm not sure how the easiest way to get accurate measurements and was wondering if any body had a template.
  21. SignJunky

    Need vectored flag like clawed image

    We the people folks....... we the people......
  22. SignJunky

    App tape roller (Built to do the work) PVC not allowed!

    I got some collars that go on the ends of the pipe...... that I used to use...... I don't use them anymore. The pipe is nice and snug and doesn't move at all.
  23. SignJunky

    App tape roller (Built to do the work) PVC not allowed!

    Nope.... not yet...... I keep her oiled down. lol articmonster - man, this thing is nice....... next best thing to ( S3# ) .......
  24. Just curious, but what would the charge be if you had a single lie text at 3" tall and 40" long? No install, just made from 651 vinyl. Thanks
  25. SignJunky

    Warning Decal!

    how many are you looking to get printed?