Knobhill
-
Content Count
427 -
Joined
-
Last visited
Never
Posts posted by Knobhill
-
-
The print is awesome. I'd offer the cut in different colors. Both look great.
-
Wrong driver, or communication problem as said previously. USB?
-
Set the pinch rollers in aprox 2" in from the edges and run out the vinyl a few feet at at a time and you'll see.release one roller, adjust and repeat. It's very simple but can be time consuming if done wrong.
-
Still looking for the emblems I took off my '54 when I shaved it. Been 20 years so it may take a while LOL
-
They first started using the 292 in 54. Late 54. He didn't get to offer an any help. His photo is not good enough to vectorize.
So...Still looking....
Got your facts wrong. The 292 was first introduced in the '55 Tbird and limited other models.
-
There was no 292 in '54. They did have a 239 and I'll check. Where was this pic taken?
-
I've purchased many. The majority are my originals... Copyrighted.
-
...............everyone was friendlier.
Ditto
-
-
45c at best
-
Has anyone figured out this problem. I have the exact same problem. I have made sure all settings are the same, I have set the X and Y points, and it still jumps over and hit the left kill button after cutting out one letter. Help! I have a bunch of projects I need to do.
Post the info requested in my last post here and I can help
-
I've had my Pcut and Bridge cutters tracking within 1/32" in 25' for months now using the method I described. Many years at other shops.
-
Good question, why so finicky. Rang out all cables used and even did connection tests at both ends. Nothing.
-
How do I set it where SBE is what opens the graphics I want to look at my computer is set to open withe some version of microsoft imaging and it is no longer available any help is greatly apreciated
Try importing the files. If they're not native to SBE you'll not be able to view them directly.
-
Try using a DMPL driver or command set.
-
What year and model?
-
I've been editing tracks all night so I'm a bit tired. See Ya
-
I didn't have time to watch the entire video, but it seems like a good one... I may have to give imprintables a try. Thanks for the post, Nona
If you don't read/watch the entire post, How can you post an accurate opinion??? My 3 cts
-
Switched connection to pure serial due to errors with long cuts. No problems since.
-
Originally I was trained to use Gerber composer over 20 years ago. Since then It's been upgraded to Omega. Now I have two shops I do work for and the first has Omega 2.6 and the second has Flexi Pro 8.5. I admit that Flexi is becoming my favorite. It really doesn't matter what software your using as long as it does the job!!!
-
Greetings earthlings, take me to your leader! What answer would you reply?
-
It takes a bit of practice but you'll get it. Gotta start somewhere! We all did. Don't be afraid to ask.
-
Welcome. Hope you find any advice helpful.
-
LMFAO, I expected this. If you believe me to be lying than ban me!!!
HELP ARTCUT SOFTWARE - URGENT
in Other Software Programs
Posted
PM your address and I'll mail you my copy of 2k5. Never registered.