Buggie Pilot

Welcome .... its addictive !!!

Reading in here late but I think he really needs to use a cnc router with a drag knife. Design and G-code in fusion 360 and send it right to the cnc...its going to last a lot longer

I haven't visited the forum in a long long time... When I started years ago John was so helpful to everyone. truly a huge loss. RIP John

My boss (real job) just got his captains licence and i would like to make him a shirt with some kind of sport fishing boat. Thanks Pete G

The font in the word warehouse is the one I am trying to figure out Thanks Pete G

Some get it and some don't. In the hands someone that does, Signblazer can do most all that the other programs can do and paired with Inkscape (another free program) you can work around any situation that comes up If you have a cutter that is supported by SignBlazer you cant go wrong for the price

I'm looking for an image of a person on shore surfcasting into the waves. Thanks

Just think where, what, or if we might be without them I honor them any chance I get. Honored to be a member Patriot Guard Riders Pete G

It needs a little cleanup but still has some grundge 5til.EPS 5til.EPS

In your cutter sceen there are 2 boxes (weed all and weed each copy ) If they are checked and there is a value greater than zero then it will cut or draw a box around your design.

Just to clarify ... It does have an automatic cutter but only cuts the job off the roll

Just an inkjet printer and only cuts width. I dont even think it is capable of using uv inks but I could be wrong

Just wondered if you ever went metal detecting in Hell!

Excellent point ....Probbaly the best bit of advise that can be given to someone just starting out

Yup ... can be done. Make your workspace bigger (I usually make one of the dimesions the same as the width of the vinyl I'm using) After you import an design, just move it out of the workspace til later. Then import more and do the same. After you have imported them just arrange them and cut Tip: I change each different object to a unique color just after importing them so if they do overlap you can select them individually with the color selector You can also OPEN multiple files at once by using the append function Good Luck Pete G

This would be photochromic ink and I'd love to try it but it's expensive ( from what I'm told almost $300/gallon )

Thanks SpeedD I actually think I did that once, but I must got amneis......er I forget what its called Thanks

I know of no way in sign blazer. What I do is type a letter ,move the mouse click, type another letter, move the mouse click, until my letters are all done (and all over the place) .........probably the way we all do it. Then to line it all up, what does help speed it up is if you us the gridand set it to the appropiate size for your letter size and check the snap box. I have found it only takes a minute or two to design a pant leg Good luck Pete G

I would just save the original file. Then select all, then resize it in the lower tool bar. Then you can cut it to see if it all works. or as an option I use often, try the pen and paper route. Then if it all works just open the original file again and cut away Good Luck Pete G

Actually the heat press is fine for doing both waterbased and plastisol ....... you only really need a flash dryer if you are doing more than 1 color prints Have Fun Pete G

Done

Nice Work

Try http://www.digitsmith.com/sitemap/f-6.html They have all kinds of stuff

Husband ALSO reads Craigs List ............ Is now using it to cut sandblast resist and letter wifes grave stone ........

Dafont.com has one set under dingbats ........ search for parrot, it will come up