JesusFreak

I have an image , actually some text (3 lines) that I have been heat pressing on hats. When I cut them one at a time they cut fine. However when I duplicate them or click on multiple copies from the cut screen on Signblazer, the letters are up and down and not as if in a straight line. The pic is merely an example. It looks ok on the screen but is cutting this way. Any ideas? Graphic1.eps Graphic1.eps

So I bought the 6 in 1 heat press from USCutter and just got started using it. So far I've only used the shirt press but I cannot figure out how to activate the timer. I set the temp and time and figured like most others that it would begin automatically after engaging the press but it didn't. I tried other things as well but I can't figure it out. Anyone know? Jon

That was it Bruce Thank you

I am having trouble when I import eps files into Signblazer. The toolbar at the bottom indicates the size that I want. When I go to print it sometimes changes the size of my image. Other times all appears correct till I print (I am cutting a print) and the image is smaller than my original dimensions. It usually though makes my image drastically smaller when I select print and go to the print screen. Somebody please help. This is no good to me if my images are the size of business cards. Here is the file if you want to check it out. Jon goofy lizard.eps goofy lizard.eps

ok...thanks I will try that Bruce

I have it in inches... I'm almost certain. I will double check. The size is correct in proportion to the work space however when I click to print and go to the print page the size in relation to the page decreases quite a bit so I think if it was in metric it would stay metric and remain the same size. When I import a file from CorelDraw that is say 8 inches in width it imports into Signblazer with 8 inches in the bottom toolbar. At this point all is well. Then I click print and when the print screen comes up its obvious it isn't correct because I am printing on 8.5x11 paper and will appear to be less than 6 and evn prints this way. Hopefully this isn't too confusing but I can't get any help on this. I sent an email on ColorChrome as well and haven't gotten a response. Jon

Has Bruce seen this post yet? I am still having these issues and its very cumbersome to have to guess what size my images will print at. Jon

Is there a plugin to launch signblazer from coreldraw x3?

I will try that tonight. Thanks Jon

So I am a newbie trying to figure out my first vinyl cutter. I am now practicing doint contour cuts on plain paper. Sometimes it gets crinkled up but I just want to make sure I am doing things correctly before I start wasting heat transfer paper at $1 a pop. Last night I changed the offset numbers in signblazer to zeros not thinking and cannot get it back to the default. My cut lines weren't lining up because it took me a while to figure out the 5 key allows you to jog in smaller increments. Is the default always correct, what are these numbers, any advice would be appreciated? Jon

I figured it out ken... The numbers were 3 and 12. The offset from the laser to the knife. I watched the video and was able to see the offsets they were using. Thanks

which button is the execute button? Which lights do I want lit up? This thing doesn't stop beeping once it has reached temperature.

If it is the same one I got from USCutter, I didn't even get directions. I am still trying to figure out how to get the timer going. I can set the time but it won't count down. Jon I am not bashing USCutter because I feel I got my money's worth, but if you are a small company with minimal support you need to at least provide some instructions. It would probably minimize half of us newbies from plagueing you with questions.

those settings are correct

yes I have that setting correct

I am printing them onto transfer paper then contour cutting. Where do I find these settings. I know that they are importanting correctly according to the dimensions in the toolbar but when I print to my c88 they are smaller. A few times they even shrunk after I hit file, print to go to the print setup. Jon

There has to be more precise ways to size your document or what good would these programs be to the sign and t-shirt industries

The measurements at the bottom appear to be the same size. This most recent time importing when I went to the print screen, the 4 inch wide image was about the size of a quarter compared to the paper size. This is really frustrating and I can't get ahold of anyone at USCutter.