BigTonyOfDC

Members
  • Content Count

    6
  • Joined

  • Last visited

Community Reputation

1 Neutral

About BigTonyOfDC

  • Rank
    Newbie
  1. BigTonyOfDC

    Can you use a USB extension cable with SignBlazer?

    Did more searching and figured it out... total length of both cables is too long, need to use a powered USB Hub or an active repeater cable. Luckily, I have a powered USB hub, plugged it in there and it works!
  2. Hey everyone, I have about a 12 foot USB cable connected from my computer to my US Cutter MH741, and it works like a charm. I needed a longer cable to be able to move the cutter to its own, permanent location, so I bought a 10 foot usb extension cable. Now, when I plug that in, and the cutter into that, the computer doesn't recognize the cutter. Does anyone know if there is anything I can do to use the extension cable? Thanks.
  3. BigTonyOfDC

    Heat Press Blowing Fuses!

    Thanks for the info Neuromax. I am running a dedicated circuit just for the cutter. I think I found an issue... the machine is rated for 15A but they used 10A parts... the power cord and power inlet are rated 10A, so if the machine draws more than thats the issue. The fues actually wasn't blown, the inlet actually melted and the plastic was covering the metal part of the fuse holder... I will give them a call because this definitely isn't safe!
  4. Hey everyone, I have the 15" by 15" clamshell press that comes with the combo deal. I've had it since November and have pressed about 150 items or so. The fuse has blown 2 times already, and melted the power cord. Is this common? Has this happened to anyone else? And is there anything I can to to prevent it from happening again? Thanks.
  5. Hi everyone, Just purchased the vinyl cutter/heat press combo from US Cutter. Opened up the boxes and there was no power cable for the press, or manual for the press... Luckily I have spare power cables at home, but am having NO luck finding the manual. Does anyone have the manual, or can someone walk me through what I need to do? Thanks!
  6. BigTonyOfDC

    Help with new heat press, can't figure out how to run it!

    Does anyone have the manual? I just bought a cutter/press combo and there was no power cable for the press or manual for the press in the boxes. I want to make sure I am doing things correctly, thanks! I have the 15" x 15"