fly24dude

just wanted to let everybody know that with a little tinkering and some white paper, I believe I have got the hang of this now. thanks all for your input.

I will give that shot tonight. Here is what I have also found out: If I "jog" the print head over top the vinyl it will cut fine. But if I adjust too much right it moves tight agains't the right side against a red reset swtich? therefore the job never prints and the print head never moves any farther. I guess with vinyl you have to try and learn before you suceed. So setting the work size to 100% and plugging in the size off of the vinyl width ruler I should be ok printing?

I have a pcut printer. Like I said that I am new to this. If you point me in the direction of finding this out for you. I get you the info. I have a 25" plotter.

I have to be honest, I am completely new at cutting vinyl decals out. I got my cutter tonight. What i can figure out is why sometimes it tries to cut in the middle of my vinyl and some other times to cuts to the left. I am using a roll of 15" vinyl. I am using signblazer elements. Rather than waste all of my vinyl trying to figure this out, I figured I could ask for professional help.