bikemike

I agree. Having at least 2 programs available make thing a lot faster and easier at times.

I am thinking that if your cuts are 13 X 15, and you are cutting on 15X15 sheets, you are oversized. The rollers will not let you cut the full size of the sheet. It should spit the sheet out, but can't say for sure with that cutter.

Did you install the driver before graphtec studio?

Same as I get when disconnected.

Mine shows up even when disconnected. But could be that I have used it in the past.

Do you see this?

Not the regular one. Only pro needs activation

Not using pro. Just the regular one.

Did you click on that button?

That release number is for graphtec studio. Not pro. I have no idea how that one detects the cutter.

That is in graphtec pro studio as you mentioned in your first post.

Someone with vinyl master should show up at some point and know the correct term for it.

Check your cutting strip and make sure it is not damaged in that area.

I was bored so.. Deleted everything but the green and text then just did 3 "outline" or whatever it would be called in your program. I used graphtec pro studio. I know, the "white" outline is yellow, that was so you could see it was there. mailbox.eps

Did you add the cutter in production manager? The blue button on the left under Job.

For all its worth, I am running win 10 with the latest forced update and corel x6 with CM3 and it is working fine. (I ignore CM3 update notices)

I disagree with that statement. I use contour cutting for what it was meant for. Contour cutting vector stuff is useless. Contour cutting printed graphics is something totally different than what you are saying.

Why are you yelling at us? from the uscutter site. The MH Series Vinyl Cutter is available in 14", 28", 34", and 50" sizes. Cutter not Compatible with Mac

Happens to all of us at some point.

Let side, second down. Change "send mode" to send now.

I think you need to measure each size and go from there. I seem to remember it needs to go toward the front of the sleeve, but don't remember where I saw that.

Usually you need to right click on the fond and hit install font. I don't think just copping them works.

I didn't fix it. You got an EPS of the original. Definitely needs work.

That file is in pretty bad shape, but here ya go. Raccoon.eps

On the bright side, you don't have to pay for it. Still strange.