bikemike

Members
  • Content Count

    1,038
  • Joined

  • Last visited

  • Days Won

    74

Everything posted by bikemike

  1. bikemike

    2002 camaro hood decal

    Polite spam?
  2. bikemike

    Punch out from 2 Curves

    Actually, I did it in graphtec pro studio. I don't know if I could say what I did 10 min ago. Just kind of winged it and it worked.
  3. bikemike

    Punch out from 2 Curves

    Just the boots? just the boots.ai
  4. bikemike

    Ce6000-60 plus not recognizing media loaded

    First guess would be check the media sensors front and back and make sure nothing got stuck in the holes.
  5. bikemike

    Applying vinyl graphics to car with ceramic coating

    Never done it, but I would think vinyl would stick very well. However, if they decided to take the decal off, it may take the coating with it.
  6. bikemike

    How Small can it cut?

    Take a lot of setup and trial and error to set an MH to do that. Graphtec would be the way to go with a lot less fiddling to get it right.
  7. Draw up a rectangle about an inch shorter than the width of your vinyl and only about 1/8 or an inch high for test cuts to set your pressure. That will save on the scrap from setting the pressure.
  8. With what you are describing and it is warped, at the most it is around .002". Good luck measuring that. Set your blade as per Skeeters directions, and set your pressure as per trial and error. The blade holder does not bottom out when down. It only goes down to the vinyl with the pressure you have set. There is more travel and should follow the vinyl along the full width of the machine.
  9. bikemike

    Pixmax720 won't contour cut

    Good to see you got it.
  10. bikemike

    Help with blade adjustment

    And what slice said.
  11. bikemike

    Graphtec Pro Studio files

    Right click on the file (where ever you saved it) and select properties, bottom left uncheck Read-only.
  12. bikemike

    My wife thinks she’s funny

    She got ya there!
  13. bikemike

    MH721 with flexisign 10

    Try printing something from flexi. If I am not mistaken, 10 will print large lines through the print. If it does, then it is pirated. And contrary to your belief we can't answer your question, we are.
  14. bikemike

    Clear Transfer Tape

    You need to start with the top layer and work your way down and have the tape large enough to cover the bottom layer. That way, you never have to take the app tape off.
  15. Go back to the design screen and make the 2 blacks (design and reg marks) the same color. Make the 2 browns (design and reg marks) the same color. They are not the same and why you have 4 and not 2. That will fix the problem.
  16. Oh, in the design window. Before you click cut.
  17. Click on the marks, right click and copy. Move your mouse pointer away, right click again and select paste over.
  18. Do the blacks first. It will make it easier.
  19. Ok, now copy your black marks and make the copy's light brown. Make sure they are in exactly the same spot. Then change the blacks to the same color and you should be good.
  20. You should have marks in exactly the same spot for each color in the design. (the same color you as the color you are cutting) Plus, if that is 2 color, you have 2 blacks. The graphic and marks need to be the same.
  21. Go to the 3rd tab under properties and pick the color you want to cut. You should have marks in exactly the same spot for each color in the design. (the same color you as the color you are cutting)
  22. bikemike

    Card stock to make gift boxes

    Maybe. First off you will need a carrier for the card stock or you will not be able to without destroying your cutting strip and trashing your cutter when the pieces start to lift. Second, depending on the thickness, and if you have the pressure to actually cut the stock, you will go through blades like crazy. I have seen templates on line, but can not remember what the site was. Goggle should help with that.
  23. bikemike

    Help

    It's a boat. Fishing boat. I see you posted in the font section. It would be nice if your first post actually said something. A post like that tells me you are demanding something.