scoobybry

Thanks some good ideas there

I own a Subaru club called Ukscoobies.com and we are now wanting a short logo that can be made into simple yet effective decals/stickers we are on the Lines Of UKS its just how to get it looking right. So if any of you experts have any ideas and a spare 5 mins any ideas would be greatly received as we need some fresh eyes looking at it lol Thanks Bry

High guy really need to find this font or one very close asap can anyone help? Thanks

Perfect thanks for your time

I have pushed it

Thanks again

That brill thanks so much Must learn how to do that

Yes just the SCR logo so i can cut it out as a template. I have tried to vectorise it but i am new to it all and just want it one colour so i can simply cut out the letters on my cutter That would be great thanks

I know you pay for what you get but just want a cutter to do my club stickers/decals i own a pcut ct630 but want another newer machine. I only want to spend £250-300 Thanks

Thanks for the info

hi it just has the usb port

Hi guys i am using a ct630 ( USB port only on the cutter ) and a laptop with windows 7. I have assigned ll the ports ect on the comp and in signblazer. However sometimes the image says sending and the cutter does not respond, but then others it will work fine. When the cutter is off it still says its sending the image . Also the cutter head when cutting sometimes stutters ( Jerky ) but still cuts the image ok. Is this down to the usb to usb lead? Would i be better with a desktop set up and use a serial port to the usb port on the cutter? Hope this makes sense. Thanks

thanks for the reply i have changed the cable. So if i set up a desktop and the get a serial that has the usb end on for the cutter this should work better ?

Hi guys another Newbie question. My cutter is cutting deeper in some parts then perfect in others and in one place does not touch the vinyl hardly at all. Am i right in thinking its the cutting strip that needs replacing ? Its a pcut ct630. Thanks Bry

just ordered a new strip. Any tricks to fitting em or is it just pop it in the grove ?

do they just lay back into the slot or need sticking down ? Thanks for a the hep guys and gals of course

ok thanks. Sorry skeeter

Yes i have noticed he always helps everyone out Where can i get the reflective tape from ?

ye got a new blade but still doing it. I think the cutting strip feels a bit bumpy tbh

Hi guys well i have a ct630 and for some reason when ii connect it to my laptop it keeps saying usb device not recognised or has malfunctioned code 42. I have down loaded the drivers from the site and they say they are installed I am running windows 7 hp x 64 please help guys as my old ct1200 worked fin off this laptop thanks

seems to be sorted now guys thanks for ll the help and advice

tried 3 like i said its strange as it cut a decal last night. All i have done is unplug my laptop. All the ports seem the same thou.

yep says com 2 in signblazer below where the ct 630 is selected

i am i have checked in device manager and it still says com 2 as i always use the same usb port. Its knowing the cutter is there as it sends the job instead of the cutter is not initialised message

right did that and got it all installed com 2. It cut a decal last night fine. I have just gone back to it and the com 2 came up in sign blazer ect but when i send it a job it just says sending and the cutter does not respond at all. Any help is much appreciated