rtfulk

Thanks

Hey, Is there any way to turn off the two sensors on the tray (front and back) on the Zencut? I just want it to act like a normal cutter for applique cutting. Thanks, Randy

YadirellT : no problem. It's not the end of the world I can still make my cuts, just have to close and reopen everytime but that is better than it not working at all. Randy

Thanks for all the suggestions. YadirellT: I have a Creation P-Cut 630. I have checked US Cutter and all the have is Flexi drivers for Windows. HowardI: I have contacted SAI and the email I got back was to look for a Snow Leopard driver for the keyspan. After I make a cut the screen on the cutter goes back to On Line. It has to be a production manager issue, because I can close and reopen the program after each cut and it works fine. I think I am going to uninstall and remove all the kext files and just start over. Thanks, Randy

Hello, I have ran into a problem with Flex Starter 8.5 V2 for Mac. I can cut a job, but when I send another job to the cutter I get this in the production manager " Cannot Find Driver". The funny thing is I can close production manager and click done on the cut/plot screen, then click cut/plot again and it will cut. It appears that the production manager is not shutting down or releasing the serial port after a job. Has anyone else ran into this problem? One other thing is sometimes the cutter will pause and stick on waiting during a job, but not often enough to really worry about. My setup: Macbook Pro Snow Leopard Flexi Starter 8.5 V2 Keyspan USA-19hs Creation P-Cut CT-630 Thanks, Randy

A good way to get exposure and it is free is to submit your items to sell at Windows Live Search and Google base (use to be Froogle). Just have to make an xml file and upload it. That is what I do and get quite a bite of exposure. Randy

I would like to use Mac software, but I do have parallels installed with XP Pro on my Macs. My embroidery software and engraving software runs only on windows so basically I can run either one. I also transferred CorelDraw X3 to one of my Macs to use on XP Pro in parallels. If I decided to go with a windows version which one would work the best with CorelDraw X3? . Also on the fabric cutting I am looking at using this: http://www.twillusa.com/product_info.php?products_id=86 I hope it is ok to post links here. I am also wanting to do Monogrammed initals on vinyl has anyone done that and will the PCUT 24" or the MH721 do this and the twill cutting? and If you had a choice which cutter would you choose the PCUT 24" or the MH721. Thanks for any answers you can give, Randy

Thanks Terry. I want to use it to cut appliques for embroidery work. It should be just like cutting a design in vinyl.... squares, circles many different shapes. Also does anyone have suggestions on what to use for a backing to run it through a cutter? Randy

Hello, I haven't purchased a cutter yet, but plan on doing so in the very near future. I primarily want to use it to cut fabric and some vinyl. I am also a Mac user I see US Cutter offers 2 versions of software. Any Mac users have a favorite or opinion on which one to use. Thanks, Randy