-
Content Count
25 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by GailNasiatka
-
new prismcut plotter announced by uscutter
GailNasiatka replied to Dakotagrafx's topic in Off Topic Section
My Titan 3 is a good cutter too. Quieter than my MH721. -
I do love the Port and Company.
-
They have great shirt prices. However if you are ordering under $200 (I think last time I checked), shipping is expensive.
-
new prismcut plotter announced by uscutter
GailNasiatka replied to Dakotagrafx's topic in Off Topic Section
Other than that it is good so far. It't not as quiet as I expected. The Wi-Fi works great. Plus I need to spend more time here on the forum so I can learn. After 13 years of doing this, I am sure there are lots of things I can learn -
new prismcut plotter announced by uscutter
GailNasiatka replied to Dakotagrafx's topic in Off Topic Section
I did exactly that. US Cutter took care of the re-install with the patches. My blade is adjusted as you described. ALL IS WELL! Thank you all again -
new prismcut plotter announced by uscutter
GailNasiatka replied to Dakotagrafx's topic in Off Topic Section
US Cutter Support has fixed the issue. Thank you Greg. Thank you everyone who tried to help. -
new prismcut plotter announced by uscutter
GailNasiatka replied to Dakotagrafx's topic in Off Topic Section
I just found this in another thread. US Cutter knows it is an issue and wants to charge people $60 to upgrade to SCAL5. Does the PrisumCut machine even support SCAL5? However, I am on Mojave not Catalina. On 10/07, Apple released their new version of Mac OS, Catalina, which now requires all programs to be written as 64bit applications and not have any dependencies on 32 bit libraries or resources. At the time of release, neither Sure Cuts a Lot 3 Pro nor Sure Cuts a Lot 4 Pro are 64bit applications and as a result have been rendered incompatible with the new OS. Since that point, however, Sure Cuts a Lot 4 Pro has received a 64 bit update. That said, please be aware that there might be a few hiccups using this upgraded version as the developer works to assure it is fully complaint with the new OS' standards.Thank you for reporting this issue to us, we have noticed there may be trend with the new 64bit version of Sure Cuts A Lot 4 Pro. In our testing, the blade offset appears to be off like the image above, and changing the blade offset does not resolve the issue. We are in touch with the developer to see if this issue can be patched. In the meantime, if the the need for a software is dire, you can upgrade your copy of SCAL4Pro to SCAL5Pro for $60, as it is currently on sale. We have not encountered these issues on SCAL5Pro, and you can find a link to that upgrade here on USCutter.com. Please let us know if anyone is encountering other issues with these newly released builds, and I'll follow-up here when a new version is released. -
new prismcut plotter announced by uscutter
GailNasiatka replied to Dakotagrafx's topic in Off Topic Section
If I re-adjust anymore, it won't cut. I followed Mz Skeeter's instructions. -
new prismcut plotter announced by uscutter
GailNasiatka replied to Dakotagrafx's topic in Off Topic Section
I re-adjusted the blade. And have re-adjusted again and still an issue. -
new prismcut plotter announced by uscutter
GailNasiatka replied to Dakotagrafx's topic in Off Topic Section
I tried on both. In all my years of cutting, I have never had any issues with my Titan or MH721 when it came to offset. -
new prismcut plotter announced by uscutter
GailNasiatka replied to Dakotagrafx's topic in Off Topic Section
I tried both ways. On the cutter and in the software. SCAL4 Pro, MAC, WIFI, 1/2 the width of a credit card. The depth is fine. I have been using cutter since 2006. I have a Titan3 and have an MH721. I use to have a Roland-BN20 so I am well versed at cutting and software and computers. I have tried to set the blade offset lower and higher. On the machine and in the software. Hope this helps you help me. :) -
new prismcut plotter announced by uscutter
GailNasiatka replied to Dakotagrafx's topic in Off Topic Section
I'm having issues with it. My file and then the vinyl cut. I am at my wits end and wish I never bought it. -
I had to learn how to do the paths. However, being able to do the arch has to be easier.
-
I have been trying to understand and figure out why all of my graphics that I open up in AI double cut when I send to Sign-cut. Also, it has started to cut through the actual decal that doesn't need cutting. I am attaching the AI file that is double cutting and I am in desperate need to fix it so it doesn't double cut. It takes too much time out of my schedule to have these double cut. Also please see attached the signcut file that shows either all the cuts or movements of the cutting. Can anyone please help me fix the AI file? and give me detailed directions on how I can do this to all of the graphics I cut. Your help is greatly appreciated. YOU HAVE NO IDEA TLP.ai
-
Yesterday I paid $14.95 for sign-cut 4 hour support and never received a call. I am disputing my paypal charge. Is there any support from Sign-Cut?
-
I ordered one too.... great deal. Thanks for sharing.
-
I tried this and I don't know what hidden or un-needed paths are. I guess I am just not very literate when it comes to this.
-
I get the image from my graphics person that helps me either in ai or jpg... I open it in AI, I perform a live trace and I figured I was happy until everything was double cutting. Unfortunately this is what I learned from my "ex" to be and he thought he knew everything. So with that said, let me try all this on another one of my images. Again, I am so greatful for your help and may have to take you up on the offer to call you. I will let you know. Gail
-
I have two cutters. I recently bought the second one and received a 1-year license. As far as the licenses. I figured out what happened. I was using both cutters on one computer before I moved. Just changed the cord. Since I moved I have a new desktop along with my laptop and wanted to hook up both and use at the same time. Unfortunately, that isn't how the lisences work. It's a transfer not multiple machine usage. So with that said, I will keep one with the lisences and will have to purchase the dongle for the other. I will still have to renew the license once the year is up but only for one instead of two machines. Of course, unless there is a better alternative to save me money. As for the 4-hour priority support that I paid $14.95 for? Never got a phone call. It has been since 4/7/2011. At the same time I wrote to support and received some lame response. Now here is her response to my question for help. I absolutely know my file wasn't ready and this isn't a response I was needing. I needed help not someone to analyze that it's not ready to cut. kim, Apr-08 15:59 (CDT): Your file is barely cut ready with alot of artifacts and extra points that should be cleaned up. You also have quite a few duplicate objects. You have white bd black layers of the same objects. You either need to clean up the image or use the cut by color feature in SignCut and only cut the black, although it has a lot of ragged edges.
-
Yes resolved from a member here and I am greatful for that.
-
Very nice work
-
Show and GO: You have no idea how much I appreciate this. I am so very HAPPY. Thank you sooooooooo much. Is there anyway you can do a quick tutorial for me as I would be able to get my graphics and cutting done. I am a visual type person. I have to be shown how to do something. I will try the above when I get my machine going to cut these and see if I can do what you annotated above to fix my other graphics. Again, I am elated. Gail
-
Question about photoshop and illustrator
GailNasiatka replied to xxwckdxx's topic in Adobe Illustrator
How? Can you explain how to do it in AI? -
The number for signcut is no longer valid. I tried calling them today.