GailNasiatka

My Titan 3 is a good cutter too. Quieter than my MH721.

I do love the Port and Company.

They have great shirt prices. However if you are ordering under $200 (I think last time I checked), shipping is expensive.

Other than that it is good so far. It't not as quiet as I expected. The Wi-Fi works great. Plus I need to spend more time here on the forum so I can learn. After 13 years of doing this, I am sure there are lots of things I can learn

I did exactly that. US Cutter took care of the re-install with the patches. My blade is adjusted as you described. ALL IS WELL! Thank you all again

US Cutter Support has fixed the issue. Thank you Greg. Thank you everyone who tried to help.

I just found this in another thread. US Cutter knows it is an issue and wants to charge people $60 to upgrade to SCAL5. Does the PrisumCut machine even support SCAL5? However, I am on Mojave not Catalina. On 10/07, Apple released their new version of Mac OS, Catalina, which now requires all programs to be written as 64bit applications and not have any dependencies on 32 bit libraries or resources. At the time of release, neither Sure Cuts a Lot 3 Pro nor Sure Cuts a Lot 4 Pro are 64bit applications and as a result have been rendered incompatible with the new OS. Since that point, however, Sure Cuts a Lot 4 Pro has received a 64 bit update. That said, please be aware that there might be a few hiccups using this upgraded version as the developer works to assure it is fully complaint with the new OS' standards.Thank you for reporting this issue to us, we have noticed there may be trend with the new 64bit version of Sure Cuts A Lot 4 Pro. In our testing, the blade offset appears to be off like the image above, and changing the blade offset does not resolve the issue. We are in touch with the developer to see if this issue can be patched. In the meantime, if the the need for a software is dire, you can upgrade your copy of SCAL4Pro to SCAL5Pro for $60, as it is currently on sale. We have not encountered these issues on SCAL5Pro, and you can find a link to that upgrade here on USCutter.com. Please let us know if anyone is encountering other issues with these newly released builds, and I'll follow-up here when a new version is released.

If I re-adjust anymore, it won't cut. I followed Mz Skeeter's instructions.

I re-adjusted the blade. And have re-adjusted again and still an issue.

I tried on both. In all my years of cutting, I have never had any issues with my Titan or MH721 when it came to offset.

I tried both ways. On the cutter and in the software. SCAL4 Pro, MAC, WIFI, 1/2 the width of a credit card. The depth is fine. I have been using cutter since 2006. I have a Titan3 and have an MH721. I use to have a Roland-BN20 so I am well versed at cutting and software and computers. I have tried to set the blade offset lower and higher. On the machine and in the software. Hope this helps you help me. :)

I'm having issues with it. My file and then the vinyl cut. I am at my wits end and wish I never bought it.

I had to learn how to do the paths. However, being able to do the arch has to be easier.

I ordered one too.... great deal. Thanks for sharing.