Jay2703

Members
  • Content Count

    6,841
  • Joined

  • Last visited

  • Days Won

    56

Everything posted by Jay2703

  1. Jay2703

    Hi from Saipan!

    Welcome
  2. Jay2703

    Bridge Cutting Plotter (new to me) HELP

    Is this picture like the back of your computer? if it is, you may have a serial port (#4). If not, you can get a Keyspan Adapter that plugs into your USB port then into the Serial port on the cutter.
  3. Jay2703

    Computer help

    I use CCleaner too.
  4. Jay2703

    Computer help

    Malwarebytes is a good tool and there is a free version: http://www.malwarebytes.org/
  5. Jay2703

    Fonts disappeared

    Di, in advanced properties you can set the application to Run as Administrator. Right Click on the start icon, Select Properties, Select Advanced click the Run as Administrator check box. Click OK twice.
  6. Jay2703

    not my work but they used vinyl

    Paint probably would have worn too. We have some vinyl that's been on the floor in our factory fom many years. It's warn but still readable.
  7. Vinyl is usually thicker than lamination material. You could probably use it to laminate though.
  8. Jay2703

    Outline/Expand problem with shapes

    It looks like the angle has something to do with it. When the angle gets too small, it goes to a square end instead of a point. Can you change the angle to make it bigger?
  9. Jay2703

    Anybody see any new light box designs lately?

    Someone posted a great new design. Do a search for LightBox and it will show up
  10. Jay2703

    Outline/Expand problem with shapes

    If the shape is not extremely critical, you could Noe Edit to make them pointed. Add a corner node and stretch it out to a point.
  11. I would look at Transfer Express. http://www.transferexpress.com/home
  12. Jay2703

    Dumb Neighbors

    We have a house by us that has a goat and 2 horses. I've driven by a couple times and seen the goat on the back of one of the horses. Not sure how he got up there.
  13. Jay2703

    Coupon Code?

    The posted image says the Valued5 is good through 12/31/14
  14. Jay2703

    Thanks for the Xmas gift USCutter!

    I finally got it to work. I activated my account from the email they sent but it still would not accept my password. Even after I reset my password it still didn't work. I tried it from a different computer this morning and was successful.
  15. Jay2703

    App tape for static cling vinyl?

    I use clear static cling vinyl and put my regular vinyl on that.
  16. Jay2703

    Thanks for the Xmas gift USCutter!

    It won't let me log in to get it.
  17. Jay2703

    High Temperature Resistant Vinyl

    I don't offhand but if you check the manufacturers websites they should have the specifications for all of their products that would have that information.
  18. Jay2703

    The Candy Bomber

    Great story!!!
  19. Jay2703

    decided to post up some of my work

    Those look great.
  20. Jay2703

    SignBlazer manual

    It was included with the original installation disk along with a Font Guide that illustrates all of the SignBlazer fonts.
  21. Jay2703

    SignBlazer manual

    Here's a link to download the learning manual. http://www.uscuttersupport.com/downloads/Software/SignBlazer/signblazer_manual.pdf
  22. Jay2703

    SBE problems.

    The sb.exe link tries to go to SignBlazer website to update. Since SB no longer exists, you get that error. Change the sb.exe to sbnt.exe and it should work.
  23. Jay2703

    Free Military Clip Art

    Thanks OW!!
  24. Jay2703

    Early winter

    Woke up to 8 degrees this morning. No snow though so that's a plus.